We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1-foot Y-splitter cable with one XLR female to two XLR male connectors

The Perfect Part

The Perfect Part XLR Female to Dual Male Y Splitter Cable 1 Foot

SKU CH-M1T2-04BGT

Splits one XLR female signal into two male outputs using oxygen-free copper conductors and 6.0 mm PVC shielding

  • Product typeAudio Adapter/Converter
  • Product colorBlack
  • Overall length1 ft (0.3 m)
  • Key featuresPortable, XLR, XLR Splitter; Audio Adapter/Converter; Color:
  • Splits one XLR signal into two outputs
  • 1 foot length keeps stage runs tidy
  • PVC jacket plus 100 % oxygen-free copper preserves clarity
  • 0 mm diameter resists kinks on tour
  • Female-to-dual-male layout fits mics and processors

Single-Foot Y Splitter for Microphone Routing

This XLR female-to-dual-male Y cable splits one microphone signal to two destinations in a one-foot length. It suits studio engineers, live-sound operators and podcasters who need a quick, portable way to feed a mixer and a recorder simultaneously.

Passive Split Limits Signal Level and Distance

The passive Y topology divides the source voltage between both outputs, so each destination receives a lower level than a direct connection. Long cable runs after the split can increase noise susceptibility, and the 6.0 mm diameter cable adds bulk in tight racks. Phantom power passes through only if both downstream devices present identical loads.

Plug-and-Play with Standard 3-Pin XLR Gear

Connectors are wired pin-for-pin, so installation is a matter of inserting the female jack into the microphone and the two male plugs into the receiving inputs. Mis-matched impedance between the two loads can cause level imbalance or frequency-response changes, and the .24 inch jacket offers limited strain relief if cables are pulled at sharp angles.

How it compares

Measured against everything we stock in XLR & Instrument Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 95% of the 119 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameThe Perfect Part
Product typeAudio Adapter/Converter
Product colorBlack
Size & build
Overall length1 ft (0.3 m)

Questions about this item

Should I pick the one-foot length or a longer cable for my microphone split?

The one-foot length keeps the signal path short and tidy on stage or in a rack; choose a longer cable only if the two male plugs must reach widely separated inputs.

What does the 6.0 mm outside diameter mean once the splitter is plugged into my mixer?

A 6.0 mm jacket is slim enough to route alongside other patch cables without crowding the XLR panel, yet thick enough to protect the 100 % oxygen-free copper conductors inside.

How does the 3-pin XLR female-to-dual-male wiring cap the signal routing in practice?

The single female jack receives one balanced source and the Y splits it to two male plugs, sending the same signal to two destinations such as a mixer and a recorder simultaneously.

More in XLR & Instrument Cables

Similar items