We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black XLR male to 1/4 inch TS mono cables coiled together, nickel-plated zinc alloy connectors, soft PVC jacket

The Perfect Part

The Perfect Part XLR Male to 1/4" TS Mono Cable 10 ft 10-Pack

SKU CH-PXPW-ANZDJ

Ten XLR male to 1/4-inch TS mono cables with nickel-plated zinc connectors and shielded 22 AWG copper conductors for noise-free instrument connections

  • Connector genderMale-Male
  • Product typeGeneral
  • Product colorBlack
  • Key features10-pack; Color: Black; Material: Nickel Plated Zinc Alloy +

Cable Length 10 ft

  • Ten cables per pack for multi-channel setups
  • Nickel-plated zinc alloy connectors resist corrosion
  • Shielded construction reduces electromagnetic interference
  • Bare copper conductors ensure clean signal transfer
  • Soft PVC jacket prevents tangling and kinking

Ten cables for stage and studio

This ten-pack supplies XLR male to quarter-inch TS mono cables for connecting microphones or line-level sources to mixers, interfaces or PA systems. Each cable measures ten feet and uses bare-copper conductors inside a soft PVC jacket. The nickel-plated zinc-alloy connectors are shielded to reduce noise in professional audio environments.

Plug in and route without tools

The male XLR and male TS plugs insert directly into standard sockets; no soldering or adapters are required. The soft PVC jacket resists kinking and tangling during rapid setup or teardown. A common issue is accidentally using a TS plug where a balanced TRS connection is needed, which leaves the signal unbalanced and more prone to hum.

Verify connector types and signal format

Check that your source equipment provides XLR male outputs and your destination devices accept quarter-inch TS inputs. Confirm the application uses unbalanced mono wiring, because these cables do not carry a balanced or stereo signal. The ten-foot length suits typical stage or rack distances but may be short for larger venue runs.

How it compares

Measured against everything we stock in XLR & Instrument Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 93% of the 119 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameThe Perfect Part
Product typeGeneral
Product colorBlack
Ports & slots
Connector genderMale-Male

Other versions of this model

2 more in the same range

Questions about this item

How do I confirm the XLR male to 1/4" TS mono cables are transmitting a clean, noise-free signal after connecting them?

Plug each cable between your microphone or instrument and the mixer or interface, then listen for hum, buzz or dropouts — the shielded bare-copper conductors and nickel-plated zinc-alloy connectors are designed for high-quality noise-free performance, so a silent background with clear audio confirms they are working as intended.

What comes in the 10-pack and do I need any extra adapters to use these cables straight away?

The package includes 10 cables, each 10 ft long with an XLR 3-pin male connector on one end and a 1/4" TS mono plug on the other; no additional adapters are required for standard XLR-to-TS connections.

Which length should I choose among the 10 ft, 15 ft and 6 ft versions for a typical stage or studio run?

The 10 ft cables in this pack suit most near-field microphone or instrument placements; choose 6 ft for tighter setups or 15 ft when the source is farther from the mixer or interface.

More in XLR & Instrument Cables

Similar items