We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Thermaltake

Thermaltake PS-TPD-0750FNFAGU-L 750 W power supply

SKU CH-57J0-N7CF3 MPN PS-TPD-0750FNFAGU-L

ATX 3.0 compatible 750 W fully modular unit with a 120 mm fluid dynamic bearing fan, 80 PLUS Gold efficiency, a native 12VHPWR connector rated for 300 W, four 6+2-pin PCIe plugs.

  • Max wattage750 W
  • Modular cablingFull Modular
  • Fan configuration1 × 120 mm Fluid Dynamic Bearing Fan
  • Power factor correctionActive
  • Main power connector24Pin
  • 12V railsSingle
  • ATX 3.0 compatible for stable high-power GPU delivery
  • 750 W continuous output rated at 45°C operating temperature
  • 80 PLUS Gold certified efficiency reduces waste heat
  • Fully modular flat cables simplify routing and airflow
  • Smart zero-fan mode stops the 120 mm fan under light load

750 W ATX 3.0 power supply for modern builds

This 750 W unit follows the Intel ATX 3.0 specification and ships with a native 12VHPWR connector rated for 300 W. It is built for systems that need PCIe Gen 5 readiness and stable delivery across a single +12 V rail. Full modular cabling keeps the interior clean.

Sustained output at 45 °C with smart fan control

The supply delivers its full 750 W continuously at 45 °C using Japanese 105 °C main capacitors. A 120 mm fluid dynamic bearing fan runs only when load demands it, staying idle at low power and ramping up under sustained stress. Hold-up time exceeds 17 msec for ride-through during brief mains interruptions.

80 PLUS Gold efficiency across the load range

Certification at 80 PLUS Gold confirms high efficiency at typical loads, reducing waste heat and electricity cost. Active PFC and a wide 100–240 V input make it suitable for global use. Protection circuits cover over-voltage, under-voltage, over-current, over-power, over-temperature and short-circuit events.

How it compares

Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.

Price $91.99
Cheaper than about 71% of the 10,869 comparable items (median $142.99).
Max wattage 750 W
Lower than about 60% of the 930 comparable items (median 850 W).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameThermaltake
Product lineToughpower GF A3 Series
Model namePS-TPD-0750FNFAGU-L
Product colorBlack
Product typeATX / ATX 3.0 Compatible
Ports & slots
PCIe power connectors4 × 6+2-Pin
12VHPWR Support Wattage: 300 W
SATA power connectors8
Output type+3.3 V@20A; +5 V@20A;;; +5VSB@3A
Power
Max wattage750 W
Modular cablingFull Modular
Power factor correctionActive
Main power connector24Pin
12V railsSingle
Power hold-up time> 17msec
Efficiency certification80 PLUS GOLD Certified
Built-in protectionOVP / UVP / OCP / OPP / OTP / SCP
Supply voltage100–240 V
AC input frequency50/60 Hz
Rated input current15A-8A
Size & build
Product dimensions5.9 in(W) × 3.4 in(H) × 5.5 in(D) in.
Product weight6.4 lb (2.9 kg)
Shipping weight2.88 kg
Package size324 × 222 × 137 mm
Compatibility
Haswell compatibilityYes
PSU length limit150 mm
Environment & compliance
Regulatory approvalsFCC/ICES/CB/cTUVus
More details
Fan configuration1 × 120 mm Fluid Dynamic Bearing Fan
Mean time between failures>100,000 h

Other versions of this model

5 more in the same range

Questions about this item

Will this 750 W unit fit in a compact case with a 150 mm depth limit?

The PSU is 150 mm long, so it fits exactly in a chassis that allows 150 mm of power-supply clearance; measure your case to confirm.

Does the package include the 12VHPWR cable needed for a modern PCIe Gen 5 graphics card?

Yes, a native 12+4-pin 12VHPWR cable rated for 300 W is supplied in the box.

Can I run the unit on a 100 V supply without losing output?

The input range is 100–240 V at 50/60 Hz, so full 750 W output is available at 100 V.

More in ATX Desktop Power Supplies

Similar items