Thermaltake Toughpower GT 750W power supply PS-TPT-0750FNFAGU-3
- 750 W
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Fully modular 850 W ATX 3.1 power supply with 80 Plus Gold efficiency, native 12VHPWR connector and 12 cm hydraulic bearing fan
Model ATX 3.1 80+ Gold (850W) White
This Thermaltake Toughpower GT unit delivers 850 W through a fully modular design that meets the ATX 3.1 specification. It is intended for system builders who need a native 12VHPWR connection for current graphics cards and a clean cable layout.
The 140 mm deep chassis uses a 12 cm hydraulic bearing fan that stops at low load under Smart Zero Fan control. Full modular cabling lets you attach only the 24 pin ATX, two 4+4 pin CPU, four 6+2 pin PCIe, one 12VHPWR, SATA and peripheral leads required for the build.
Verify that your chassis can accommodate a 140 mm long power supply and that the 550 mm main cable reaches the motherboard connector. Confirm the 600 mm 12VHPWR lead suits your graphics card position and that the 700 mm CPU cables reach the socket without strain.
Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Thermaltake |
| Model name | PS-TPT-0850FNFAGU-W |
| Product color | Snow |
| Product type | ATX 3.1 Compatible |
| Ports & slots | |
| Output type | +3.3 V@20A, +5 V@20A, +5VSB@3A |
| Connection types | 1 × 12VHPWR (12+4) PCIe / 1 × 24 pin (20+4) ATX / 4 × 4 pin Peripheral / 4 × 8 pin (6+2) PCIe |
| Power | |
| Max wattage | 850 W |
| Modular cabling | Full Modular |
| Power factor correction | Active |
| Power good signal | 100-250 msec |
| Power hold-up time | > 17msec at 80% load |
| Efficiency certification | Meet 80 PLUS Gold at 115Vac input. |
| Built-in protection | OVP/UVP/OCP/OPP/OTP/SCP |
| Supply voltage | 100–240 V |
| AC input frequency | 50/60 Hz |
| Rated input current | 10A Max. |
| Size & build | |
| Product dimensions | 150 × 86 x140 mm |
| Shipping weight | 1.13 kg |
| Package size | 279 × 216 × 123 mm |
| Compatibility | |
| PSU length limit | 140 mm |
| Environment & compliance | |
| Regulatory approvals | CE/UKCA/ICES/TUV/LVD/RCM/CB/FCC/cTUVus/BSMI/CCC/BIS/S-MARK |
| More details | |
| Fan configuration | 12 cm Hydraulic bearing fan |
| Mean time between failures | >100,000 h |
Other versions of this model
The native 12VHPWR (12+4) PCIe connector is rated for 450 W and complies with the ATX 3.1 power excursion requirements for modern graphics cards.
At 140 mm long and 150 x 86 mm wide, it matches the typical ATX form factor used in most mid-tower chassis.
Push the 12+4 pin connector straight in until the latch clicks; the 600 mm cable reaches most GPU positions without sharp bends.
More in ATX Desktop Power Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?