Timken 9107PP 6007 Radial Ball Bearing 35mm Bore 62mm OD 14mm Width Double Sealed

Bearing 6007 35 mm bore 62 mm OD

The Timken 9107PP is a 6007 series radial ball bearing with a 35 mm bore and 62 mm outside diameter. Its double sealed closure uses contact seals to retain lubricant and resist contamination. Alloy steel rings and balls handle a dynamic radial load capacity of 17 700 N. The bearing ships new with pillowblock grease already applied.

Check shaft tolerance

Verify that your shaft diameter falls within the bore tolerance of +0/- 0.012 mm for a correct interference or clearance fit. Confirm the housing bore matches the 62 mm outside diameter and that the 14 mm outer ring width suits the available axial space. Ensure the 1 mm maximum fillet radius clears any shoulder or chamfer on the shaft or housing. No retaining ring is included, so plan axial location separately.

Sealed contact design limits speed under sustained

Contact seals add drag that raises operating temperature during continuous rotation compared with shielded or open variants. The ABEC 1 rating and standard steel cage set the baseline precision and speed envelope for general machinery use. Pillowblock grease provides initial lubrication, but relubrication intervals depend on load, speed and ambient conditions not covered by the bearing itself. The double seal helps maintain grease life in dirty or wet environments.