We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron pillow block bearing with alloy steel insert, double sealed, cylindrical bore 1 1/4 in

Timken

Timken YAS 1 1/4S SGT Pillow Block Bearing collectible

SKU CH-0RRP-F4PZH

A new Timken pillow-block bearing with a cast-iron housing, 1 1/4-inch bore and double seals for radial ball applications

  • Product typeBearings, V-belts & Power Transmission Equipment
  • Product colorBlack
  • Alloy steel insert resists wear under heavy radial loads
  • Cast iron housing withstands 200 °F operating temperature
  • Double-sealed closure keeps contaminants out at -65 °F
  • Bolt-through mount with two holes simplifies installation
  • Compact 3.281 in height fits tight machinery spaces

Product identity

This Timken pillow block bearing is a new collectible item categorised under sports memorabilia. It carries the TIMKEN brand and features a cast iron housing with a black finish. The unit is supplied as a set and is intended for display or collection purposes rather than active installation.

Thermal and environmental limits

The bearing is rated for continuous operation between minus 65 degrees F and 200 degrees F using an NGLI #2 equivalent lubricant. Its double-sealed closure helps retain lubricant and exclude contaminants during normal service. No noise or power-draw figures are provided for this collectible unit.

Sustained-load behaviour

With a 1 1/4 inch cylindrical bore and alloy steel radial ball insert, the bearing is designed to handle radial loads within its published temperature range. The cast iron housing and two bolt-through mounting holes on a 4 5/8 inch centre-to-centre spacing provide rigid location under prolonged loading. Collectors should note the overall dimensions of 6.187 in length, 3.281 in height and 1.656 in width.

How it compares

Measured against everything we stock in Fan Collectibles & Memorabilia, at today’s prices. Recalculated every night.

Price $129.99
Pricier than about 91% of the 1,367 comparable items (median $26.99).

Specifications

Product
Brand nameTIMKEN
Product typeBearings, V-belts & Power Transmission Equipment
Product colorBlack

Questions about this item

How do I bolt the 1 1/4 in bore pillow block to the frame without misaligning the 4 5/8 in center-to-center holes?

Align the two bolt-through holes on the 4 5/8 in centers, start both bolts by hand, then torque them evenly in a cross pattern so the cast-iron housing seats flat and the cylindrical bore stays true.

When should I plan to re-grease the double-sealed radial ball insert that ships with NGLI #2 equivalent lubricant?

Re-lubricate through the fitting at intervals matched to speed and load; the factory NGLI #2 equivalent fill is good for initial running, but sustained operation will purge grease past the double seals.

At what temperature will the NGLI #2 equivalent grease in this bearing reach its upper limit during continuous duty?

The lubricant is rated to 200 Degrees F; sustained running above that temperature will degrade the grease and shorten insert life.

More in Fan Collectibles & Memorabilia

Similar items