TINGLEY RUBBER CORP. C44129 Arc Flash Flame Resistant Rain Coat surveillance - industrial
Flame-resistant PVC rain coat with Arc-rated protection, ANSI Class 3 high-visibility orange, and sealed seams for liquid proofing
- Arc-rated 11 cal/cm² ATPV protects against flash hazards
- ANSI Class 3 high-visibility orange enhances low-light detection
- Therm-O-Rad sealed seams deliver 100% liquid-proof barrier
- Full-vented cape back with 10.5 oz fabric improves air circulation
- Non-conductive hardware and D-ring access support fall-arrest systems
Arc-Flash Rain Coat for Industrial Workers
This new TINGLEY rubber coat meets ANSI Class 3 and Arc Flash PPE Category 2 with an ATPV rating of 11 cal/sq cm. The PVC construction uses Therm-O-Rad sealed seams for 100 percent liquid-proof protection. Non-conductive hardware and a stand-up collar add safety for electrical environments. High-visibility orange ensures workers are seen in low-light conditions.
Suits Electrical Crews Needing Full Arc Protection
The garment fits men who require overhead shoulder mobility and fall-protection D-ring access on the job. A full-vented cape back improves air circulation during long shifts. Hook-and-loop cuffs and a zipper closure allow quick adjustment. Buyers needing a lighter fabric weight than 10.5 oz or a different colour should look at something else.
ATPV 11 cal/sq cm Decides Arc Suitability
The 11 cal/sq cm rating places this coat in Arc Flash PPE Category 2 for incident-energy exposure. California Proposition 65 warns that the product contains a chemical known to cause cancer. Verify that your hazard assessment requires Category 2 before selecting this coat.
How it compares
Measured against everything we stock in Industrial & Inspection Cameras, at today’s prices. Recalculated every night.
- Price $150.99
- Pricier than about 89% of the 34 comparable items (median $57.99).
Specifications
| Product | |
|---|---|
| Brand name | TINGLEY |
Questions about this item
How do I put on the C44129 rain coat and what step is often missed?
Close the zipper fully, then secure the hook-and-loop cuffs and stand-up collar; the D-ring access flap must be snapped shut or the fall-protection harness connection will be exposed.
What part of the coat will need replacement after repeated arc-flash exposure?
The PVC shell and Therm-O-Rad sealed seams degrade after repeated high-heat events; inspect for stiffness or seam separation and replace the garment when the 11 cal/sq cm ATPV rating can no longer be guaranteed.
What limits how long I can work in this coat during sustained heat?
The 10.5 oz fabric weight and full-vented cape back delay heat build-up, but the 11 cal/sq cm ATPV rating is the first limit reached under continuous arc-flash conditions.
More in Industrial & Inspection Cameras
Similar items
Thermal Master P2 Android Thermal Camera 512×384 Super Resolution
- P2 Thermal Camera &…
Audiovox - Generic surveillance - industrial 10FT .33in
- Various Digital Dev…
- 10 ft (3.05 m)





