We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue metal vacuum pump and copper desoldering braid on spool

(TM) Desoldering Wick & Solder Sucker Kit — 2.5mm × 1.5m Braid, Blue Vacuum Pump

SKU CH-MZRY-4BZW1

A 2.5 mm × 1.5 m no-clean flux copper braid paired with a 7.48" aluminium vacuum pump for one-handed desoldering

  • Fit and compatibilityi025
  • Certifications and standardsPlastic, true
  • No-clean flux braid removes solder cleanly
  • Oxygen-free copper wick transfers heat fast
  • High-vacuum pump clears molten solder in one stroke
  • Ambidextrous 7.48" pump fits left or right hand
  • 5mm × 1.5m wick reaches tight joints

Desoldering Kit with Braid and Pump

This kit pairs a 2.5mm wide, 1.5m long oxygen-free copper braid with a blue vacuum desoldering pump. The braid uses a no-clean flux and geometrically precise weave for effective solder removal. The pump features an aluminium body measuring 7.48 inches by 0.79 inches. It is designed for electronics repair and rework tasks.

Sustained Desoldering Performance

The oxygen-free copper braid provides excellent thermal transfer, allowing faster desoldering at lower iron temperatures during extended sessions. Its no-clean flux leaves minimal residue, reducing the need for frequent board cleaning between joints. The pump's high-pressure vacuum maintains consistent suction force over repeated cycles without loss of pressure. The aluminium body dissipates heat effectively during continuous operation.

Practical Interface Limits

The 2.5mm braid width limits access to very fine-pitch components or densely packed surface-mount pads. The 1.5m length provides a finite supply of fresh braid for larger rework jobs. The pump's 0.79 inch diameter nozzle may not seal effectively on large solder pools or wide through-hole joints. The manual trigger mechanism requires user coordination for each desoldering cycle.

How it compares

Measured against everything we stock in Soldering Irons & Stations, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 85% of the 802 comparable items (median $25.99).

Specifications

Compatibility
Fit and compatibilityi025
Environment & compliance
Certifications and standardsPlastic, true

Questions about this item

Will the 2.5mm wide braid and 7.48in pump handle all-day bench work without overheating?

The braid uses oxygen-free copper for excellent thermal transfer, letting you desolder at lower iron temperatures. The aluminum-bodied pump dissipates heat quickly and its high-pressure vacuum clears joints in one stroke, reducing dwell time.

What other tools do I need to use this kit effectively?

You need a soldering iron to melt the joint before applying the braid or pump tip. Flux is not required because the 1.5m roll already contains no-clean flux. A stand and safety glasses are recommended for safe handling.

Can the 0.4oz braid and 7.48in pump clear solder from vintage through-hole boards?

The 2.5mm width fits between tight through-hole pads, and the no-clean flux on oxygen-free copper wets old solder quickly. The pump’s 0.79in diameter tip covers standard pad sizes and its one-handed trigger works at any angle.

More in Soldering Irons & Stations

Similar items