We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Tripp Lite

Tripp Lite 9PX5KTF5G2 5000VA 5000W Online UPS 18x5-20R 2xL6-20R 1xL6-30R 6U Rack/Tower

SKU CH-6TB8-ZMXHH MPN 9PX5KTF5G2

Online double-conversion UPS delivers 5000VA 5000W unity power factor with 18 NEMA 5-20R, two L6-20R, one L6-30R and hardwired output plus included NETWORK-M3 Gigabit network card for remote

  • Volt-ampere rating5000 VA
  • Power rating5000 W
  • Voltage output240 V AC 230 V AC 220 V AC 208 V AC 200 V AC 100 V AC 110 V
  • AC output frequency50 Hz 60 Hz
  • Power outlets18 x NEMA 5-20R 2 x NEMA L6-20R 1 x NEMA L6-30R 1 x Hardwire
  • Power outletsNEMA 5-20R NEMA L6-20R NEMA L6-30R Hardwired
  • Unity power factor delivers full 5000 W output for dense loads
  • Online double-conversion topology protects against blackouts, brownouts, surges and line noise
  • Hot-swappable VRLA batteries with ABM+ predictive analytics prevent unexpected downtime
  • Included NETWORK-M3 Gigabit card enables full remote monitoring and control
  • 21 outlets (18×5-20R, 2×L6-20R, 1×L6-30R) plus hardwired output for flexible distribution

Triple-conversion topology for critical loads

This online double-conversion UPS delivers 5000 VA and 5000 W with unity power factor, supporting servers, PoE switches and networking gear. It accepts 200 to 240 V AC input and provides selectable output voltages from 100 to 240 V AC at 50 or 60 Hz. The included NETWORK-M3 Gigabit card enables full remote management.

6U rack or tower chassis with hot-swappable

The unit measures 17.3 inches wide, 10.2 inches high and 27 inches deep, weighing 203 lbs. Eighteen NEMA 5-20R outlets, two L6-20R, one L6-30R and one hardwired output connect diverse equipment. Input uses a hardwired connection or NEMA L6-30P. Lead-acid VRLA batteries are hot-swappable and recharge in three hours.

Replaces smaller single-phase UPS units

At full load the battery runs for 3.50 minutes and at half load for 9.40 minutes, giving time for orderly shutdown. ABM+ predictive analytics flag replacement before unexpected failure. The step-down transformer and rack-mount hardware suit 6U cabinets. Buyers needing longer runtime or three-phase input must look elsewhere.

How it compares

Measured against everything we stock in Uninterruptible Power Supplies (UPS), at today’s prices. Recalculated every night.

Price $7,734.99
Pricier than about 91% of the 1,153 comparable items (median $948.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEATON
Product line9PX G2
Model name9PX5KTF5G2
Part number9PX5KTF5G2
Power
Volt-ampere rating5000 VA
Power rating5000 W
Voltage output240 V AC
230 V AC
220 V AC
208 V AC
200 V AC
100 V AC
110 V AC
120 V AC
AC output frequency50 Hz
60 Hz
Power outlets18 x NEMA 5-20R
2 x NEMA L6-20R
1 x NEMA L6-30R
1 x Hardwired
Battery typeLead Acid Battery
Runtime on batteryBackup/Run Time (Full Load):
3.5 Minute
Backup/Run Time (Half Load):
9.4 Minute
Battery charge time3 Hour
Replacement batteryHot Swappable:
Yes
Replaceable Battery:
Yes
Size & build
Shipping weight122.47 kg
Package size991 × 660 × 635 mm

Questions about this item

What output voltages does the 5000 VA online UPS support for connected equipment?

The unit delivers selectable output at 100 V, 110 V, 120 V, 200 V, 208 V, 220 V, 230 V and 240 V AC at 50 Hz or 60 Hz.

What rack depth and clearance are required to mount the 6U chassis?

The chassis is 27 inches deep, 17.3 inches wide and 10.2 inches high; allow additional rear clearance for the hard-wire gland and cable bend radius.

How do you install the NETWORK-M3 Gigabit card, and what step is often missed?

Insert the card into the dedicated slot on the rear panel, secure the thumbscrews, then connect the Ethernet cable before powering on the UPS so the card initialises correctly.

More in Uninterruptible Power Supplies (UPS)

Similar items