Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 ft DisplayPort 1.4 cable with latching connectors carries 8K UHD at 30 Hz and HDR with 36-bit deep colour
The Tripp Lite P580-001-V4 is a one-foot DisplayPort 1.4 cable that links a compatible source to a display at up to 7680 x 4320 resolution and 30 Hz using 4:2:0 chroma subsampling. It carries HDR metadata and 36-bit deep colour for richer contrast. Latching connectors lock the plugs in place so the link stays secure during use.
Plug each male connector into a DisplayPort 1.4 port and the link works immediately with no drivers or software. The latches must be squeezed to release; pulling the cable body instead of the latch tab is the most common reason a connector feels stuck or gets damaged. Ensure both devices support the 1.4 specification to reach the stated 32 Gbps bandwidth.
The interface caps 8K UHD at 30 Hz with 4:2:0 colour sampling, so motion clarity at that resolution is lower than at 4K or 1440p where higher refresh rates are possible. HDCP 2.2 protection is supported, but newer copy-protection revisions are not covered by this cable version. Cable length is fixed at one foot, which restricts placement to very close device spacing.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Tripp Lite |
| Model name | P580-001-V4 |
| Product type | DisplayPort Cable |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 1 ft (0.3 m) |
| Cable length | 1 ft (0.3 m) |
| Shipping weight | 0.14 kg |
| Package size | 127 × 102 × 25 mm |
Check the display's on-screen information or graphics control panel to confirm the active resolution reads 7680 x 4320 at 30 Hz with HDR enabled.
The package contains the 1 ft male-to-male DisplayPort 1.4 cable with latching connectors; no additional adapters or software are required for a direct source-to-display connection.
The 1 ft (0.31 m) version is designed for tight spaces such as rack mounts or adjacent devices; select a longer model only if the gap between ports exceeds this distance.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?