We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue four-bolt flange bearing, cast iron housing, alloy steel ball insert

Tritan

Tritan UCF211-34 flange bearing, blue collectible

SKU CH-JGAT-QAAJ8

A new blue collectible flange bearing with a 2-1/8 inch bore and four mounting holes

  • Product typeBearings, V-belts & Power Transmission Equipment
  • Product colorBlue
  • Double-sealed closure blocks contaminants for longer service life
  • Cast-iron housing delivers rigid support under heavy radial loads
  • Alloy-steel radial ball insert handles high-speed operation reliably
  • Pre-filled NLGI #2 equivalent grease simplifies installation and maintenance
  • Wide -40 °F to 250 °F range suits extreme temperature environments

Blue collectible flange bearing for power

The Tritan UCF211-34 is a blue four-bolt flange bearing designed for power transmission equipment. It uses a radial ball insert made from alloy steel with a 2-1/8 inch cylindrical bore. The cast iron square housing provides rigid mounting for industrial machinery. This new collectible unit suits maintenance teams and hobbyists who need a fixed expansion bearing.

Thermals noise and power draw in normal use

Double seals retain the NLGI #2 equivalent lubricant and keep contaminants out during standard operation. The bearing runs within a wide temperature window from minus 40 to 250 degrees Fahrenheit. Fixed expansion type means the housing does not float, so alignment stays consistent. Normal loads produce minimal vibration and no audible noise.

Behaviour under sustained load rather than a short

Under continuous duty the alloy steel balls and raceways share load evenly across the radial ball design. The cast iron housing resists deflection so the bore remains true over long runs. Lubricant life is extended by the double sealed closure even at the upper temperature limit. Mounting holes on 5-1/8 inch centres keep the unit secure when vibration increases.

How it compares

Measured against everything we stock in Fan Collectibles & Memorabilia, at today’s prices. Recalculated every night.

Price $56.99
Pricier than about 79% of the 1,367 comparable items (median $26.99).

Specifications

Product
Brand nameTRITAN
Product typeBearings, V-belts & Power Transmission Equipment
Product colorBlue

Questions about this item

How do I mount the UCF211-34 flange bearing, and what is the common alignment mistake?

Bolt the square housing through its four holes on a 5 1/8 in centre-to-centre pattern; the step most people miss is shimming the base until the 2-1/8 in bore runs perfectly parallel to the shaft, otherwise the UC211-34 insert loads unevenly and wears the double seals.

What maintenance will the UCF211-34 need after installation?

The double-sealed UC211-34 insert comes packed with NLGI #2 equivalent grease and has no relubrication port, so plan to replace the entire unit once the factory fill degrades — typically after the bearing has seen its full -40 to 250 °F temperature range in service.

What is the first limit the UCF211-34 hits under continuous running?

The 250 °F maximum operating temperature is the ceiling; sustained loads that push the alloy-steel balls and cast-iron housing past that point break down the NLGI #2 grease and double seals faster than any other factor.

More in Fan Collectibles & Memorabilia

Similar items