We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical M12 inductive sensor, chrome-plated brass housing, M12 connector

Turck

Turck BIM-M12E-Y1X-H1141 1074003 inductive sensor M12 90 mm 8.2 VDC NAMUR ATEX SIL2

SKU CH-KB6D-H3W0E MPN BIM-M12E-Y1X-H1141

M12 inductive sensor with 90 mm switching distance, NAMUR output at 8.2 VDC, ATEX and SIL2 approved

  • Labor warranty1 Year
  • Product typeTest Equipment
  • Number of items1 pack
  • Sold asBox
  • Parts warranty3 Years
  • M12 threaded barrel simplifies panel mounting
  • 90 mm sensing range covers wide detection zones
  • NAMUR output meets DIN EN 60947-5-6 standard
  • ATEX and SIL2 approvals support hazardous-area use
  • Chrome-plated brass housing resists industrial wear

Industrial magnetic-inductive sensor M12 NAMUR

The Turck BIM-M12E-Y1X-H1141 is a magnetic-inductive proximity sensor built for hazardous-area installations. It carries ATEX gas and dust approvals plus SIL2 functional-safety certification, making it suitable for safety-related circuits in zones where explosive atmospheres may occur.

Suited for NAMUR input modules in safety systems

This device suits engineers wiring NAMUR-compliant input cards on safety PLCs or relay modules that require a two-wire 8.2 VDC signal. It is not intended for installations that demand a standard PNP or NPN switching output, nor for applications that require a non-NAMUR interface or a different barrel thread.

Rated switching distance 90 mm

The sensor achieves its 90 mm rated switching distance only when actuated by the specified DMR31-15-5 magnet; without that magnet the operating distance will be lower. This single figure determines whether the sensor can bridge the required gap in your machine guard or position-detection layout.

How it compares

Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.

Price $51.99
Cheaper than about 78% of the 5,006 comparable items (median $95.99).

Specifications

Product
Brand nameTURCK
Model nameBIM-M12E-Y1X-H1141 1074003
Product typeTest Equipment
In the box
Number of items1 pack

Questions about this item

What power supply do I need to run the 8.2 VDC NAMUR output on this M12 sensor?

Provide a DC source that delivers a nominal 8.2 VDC to the two-wire NAMUR loop; the sensor draws its operating current from that same supply.

Will the M12 × 1 connector on this sensor mate with my existing M12 cables?

Yes, the male M12 × 1 connector follows the standard thread and pin spacing, so it fits any compatible M12 female cordset you already use.

How can I verify the 90 mm switching distance is achieved after installation?

Bring the DMR31-15-5 magnet to the sensing face and confirm the NAMUR current shifts at or near the rated 90 mm distance.

More in Electrical Trade Tools & Kits

Similar items