u-power 64000W Peak 16000W Power Inverter 24V DC 110V 220V AC 60Hz

24 V pure sine wave inverter

The u-power unit converts 24 V DC into split-phase 110 V and 220 V AC at 60 Hz. It delivers 8 000 W continuous on each voltage leg and 16 000 W total continuous power. A built-in LCD shows output data, and the integrated UPS with battery charger supports solar or backup installations. The low-frequency topology suits heavy inductive loads.

8 000 W per leg with 32 000 W peak headroom

Each 110 V or 220 V output runs 8 000 W continuously and can surge to 32 000 W for motor starts. When both voltages are used together the inverter still supplies 8 000 W total continuous and 32 000 W peak. Running 220 V alone is possible but the display then reports only half the actual wattage and current.

Split-phase control board prefers 110 V loading

The factory control board regulates 110 V output as the reference, so balanced 110 V and 220 V loading or heavier 110 V use gives the most accurate metering. If the application demands full 220 V metering without 110 V load, a custom control board is required. This constraint decides whether the stock unit fits the installation.