Tripp Lite PV400USB 400W power inverter 12V 120V 2 USB 2 outlet
- 2 × 5-15R
- 3 ft (0.91 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 24V DC to 110V and 220V AC at 60Hz with 10000W continuous and 40000W peak per output, 20000W total continuous, 80000W peak, plus UPS, charger and LCD
This 24V DC to AC inverter delivers 10000W continuous power with 40000W peak on each 110V and 220V output. It suits off-grid solar installations, backup systems and mobile power needs where clean split-phase output is required. The unit includes UPS transfer, a 220V battery charger and an LCD display for monitoring.
The inverter operates at a fixed 60Hz frequency and is designed for balanced use of 110V and 220V outputs simultaneously. Running 110V loads alone is possible but the LCD will only show half the actual 110V wattage and current. The control board prioritises 220V regulation, so unbalanced 110V-only operation reduces monitoring accuracy.
The single figure that decides fit is the 80000W peak surge capacity across both phases combined. Systems with large motor starts or heavy inrush currents must stay within this limit. If the combined surge demand exceeds 80000W, this inverter will not support the load.
Measured against everything we stock in DC-to-AC Power Inverters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | U-POWER |
The inverter delivers 10000 W continuous and 40000 W peak on 110 V alone, on 220 V alone, or on both voltages simultaneously; the manufacturer recommends balanced 110 V and 220 V loading for optimal control-board performance.
80000 W is the combined instantaneous surge capacity across both voltages; each individual output (110 V or 220 V) can surge to 40000 W, while continuous load on any output is limited to 10000 W.
The unit provides L1, N and L2 terminals: L1–N and L2–N each give 110 V, while L1–L2 gives 220 V at 60 Hz; total continuous draw across all terminals cannot exceed 10000 W.
More in DC-to-AC Power Inverters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?