We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE injector with US power cord and LED indicator

Ubiquiti Networks

Ubiquiti Networks PoE Injector 50 V 60 W AirFiber

SKU CH-WTKJ-CWVRC

Delivers 50 V, 60 W PoE to AirFiber devices with Gigabit LAN, ESD protection, and a power LED on 120/230 V input

  • Delivers 60 W at 50 V for AirFiber radios
  • Accepts 120 V or 230 V AC input worldwide
  • Gigabit LAN port passes data and power together
  • Earth grounding and ESD protection safeguards connected gear
  • Power LED shows active status at a glance

Purpose and fit

The Ubiquiti Networks PoE Injector delivers 50 V at 60 W to compatible AirFiber radios over a single Gigabit LAN port. It suits installers who need to power outdoor wireless links without running separate mains cables to the antenna site.

Thermals noise and power

The unit accepts AC 120/230 V input and converts it to a regulated 50 V output with built-in earth grounding and ESD protection. A front Power LED confirms operation while the passive design runs silently with no moving parts.

Build integration

A US style power cord is included so the injector plugs directly into standard mains sockets. The Gigabit port passes data and power together freeing a separate switch port and reducing cable count on the tower or mast. Buyers who need higher voltage PoE standards or multiple powered ports will need a different solution.

How it compares

Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.

Price $19.99
Typical for this category: the median of 1,221 items is $19.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the injector and what is the common mistake?

Connect the AC cord to 120/230 V mains, link the LAN port to your network, then run the PoE cable to the AirFiber radio; the step often missed is attaching the earth grounding wire for ESD protection.

What maintenance or replacement will this injector need later?

No routine maintenance is required; if the Power LED stops lighting or the unit no longer delivers 50 V at 60 W, replace the injector.

What limit appears first during sustained high-load use?

The 60 W output ceiling is reached before any thermal or voltage limit, so continuous draw above 60 W will shut the port down.

More in Network Adapters & RJ45 Plugs

Similar items