Ultratech, Inc. 2102 Spill Berm Corner, Polyurethane, Orange
Polyurethane corner piece joins 2101 berm sections at 90 degrees to help meet NPDES and SPCC requirements
- Creates 90-degree corners for spill containment systems
- Compatible with model 2101 for modular assembly
- Polyurethane construction resists chemicals and abrasion
- Bright orange colour improves on-site visibility
- Supports NPDES and SPCC regulatory compliance
Corner Spill Berm Component
The Ultratech 2102 polyurethane corner piece creates a ninety-degree turn in a spill containment system. Its orange urethane construction resists chemicals and weathering for reliable outdoor or industrial use. Facility managers and environmental compliance teams use it to complete a berm perimeter around tanks or equipment.
Upgrades From Improvised Barriers
This corner replaces makeshift seals such as sandbags or taped sheeting that fail under pressure or degrade quickly. The jump is worth it when a site must meet NPDES and SPCC regulatory requirements for secondary containment. It locks onto the 2101 straight section to form a continuous, code-compliant barrier.
Sustained Load Behaviour
Under continuous exposure the polyurethane holds its shape and seal without cracking or softening. The material withstands repeated vehicle traffic and prolonged contact with hydrocarbons or solvents. Weight and dimensions remain stable so the corner stays seated on uneven surfaces throughout the service life.
How it compares
Measured against everything we stock in Face Masks, Respirators & PPE, at today’s prices. Recalculated every night.
- Price $97.99
- Pricier than about 87% of the 5,612 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | ULTRATECH |
Questions about this item
What dimensions does the 2102 corner piece add to a 2101 berm run?
The corner measures 9 inches long, 8 1/2 inches wide and 2 1/2 inches high, forming a 90-degree turn in the containment line.
How do I attach this corner to the straight 2101 sections?
The urethane corner nests over the ends of two 2101 berms; the step often missed is pressing both joints down fully so the 90-degree seal stays watertight.
When should I replace the polyurethane corner?
Replace it if the orange urethane shows cracks, deep abrasion or permanent deformation that would let liquid escape at the 90-degree joint.
More in Face Masks, Respirators & PPE
Similar items
YOUNGSTOWN GLOVE CO. 12-3390-60-XXL Flame and Heat Resistant Gloves
- HAWA





