Unique-Bargains 0.8mm MK8 Brass Nozzle 1.75mm 2pcs
A pair of 0.8 mm brass MK8 nozzles for 1.75 mm filament with M6 thread and 5 mm thread length
- 8 mm brass nozzle gives wider extrusions for faster prints
- MK8 M6 thread fits many 1.75 mm filament printers directly
- Smooth internal bore reduces clog risk on PLA and ABS
- Stamped size marking lets you identify the nozzle at a glance
- Two nozzles in the pack provide a ready spare for maintenance
MK8 brass nozzle 0.8 mm for 1.75 mm filament
Two brass nozzles with a 0.8 mm orifice and M6 thread fit MK8 hot-ends that accept 1.75 mm filament. The 5 mm thread length and 13 mm overall length match the standard MK8 profile, and each tip is stamped for quick identification.
Suited for non-abrasive materials only
The brass construction handles PLA, ABS and PCL reliably but will wear quickly with carbon-fibre, glow-in-the-dark or metal-filled filaments. Buyers who need abrasion resistance should look for a hardened-steel or ruby alternative instead.
0.8 mm orifice sets extrusion width
This single dimension controls layer height range, print speed and detail level for every job. Choose a smaller nozzle for finer features or a larger one for faster, stronger parts if 0.8 mm does not match the intended workflow.
How it compares
Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 99% of the 5,855 comparable items (median $91.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
What thread size and length does the MK8 brass nozzle need to fit my hotend?
The nozzle uses an M6 thread with a 5 mm thread length, matching standard MK8 hotends.
Which tools and temperature range are required to swap the nozzle without damaging the heat block?
Heat the block to 180-220 °C for PLA or 240-280 °C for ABS, hold the block with a spanner, then unscrew the old nozzle and tighten the new one with a socket screwdriver.
After installing the 0.8 mm brass nozzle, what ongoing maintenance or replacement should I plan for?
Brass wears faster with abrasive filaments; expect to replace the nozzle when the bore enlarges or print quality drops, and recalibrate the nozzle-to-bed gap after every change.
More in Print & Scan Accessories
Similar items
Aim
Aim Paper Pickup Roller 2/PK Dell 1700 1710 1720 JR385
- Printing Supplies
- Replacement Parts
$3.99
0.00004838BTC
In stock
HP
HP C2H57A 220V Maintenance Kit 200,000 pages
- Other Accessories
- Sold as 1 Kit.
$463.99
0.00562569BTC
In stock
