Unique-Bargains 16 Pin 0.5mm Pitch 200mm FFC A Type Flip Up Adapter Kit

Flexible flat cable kit

This kit provides a 16-pin flexible flat cable with a flip-up adapter for internal board-to-board connections. It suits repair technicians and hobbyists working on laptops, LCD panels, cameras or car audio units. The 200 mm length bridges typical spacing between a button board or converter board and the mainboard. Buyers needing longer runs or different pin counts should look elsewhere.

0.5 mm pitch and A-type pinout

The cable and adapter both use a 0.5 mm conductor pitch with 16 pins arranged in A-type layout, meaning pins sit on the same side at each end. This single specification determines whether the kit matches the target device; mismatched pitch or pin orientation will prevent correct insertion. Verify the host connector before ordering.

Low-voltage signal use

Rated for 60 V and 80 °C, the assembly is designed for low-power signal routing rather than power delivery. The polyethylene-insulated cable (AWM 20624) remains flexible in normal operating temperatures, and the stiffened ends ease insertion without adding bulk. No active cooling or special power budgeting is required.