Unique-Bargains 1W 8 Ohm 77mm Micro Internal Speaker 2pcs
Pair of 1 W 8 Ω full-frequency magnet speakers, 77 mm diameter by 23 mm deep, for compact audio projects
- Clear, melodious sound from full-frequency magnet design
- Compact 77 mm diameter fits mini enclosures and doorbells
- 1 W rated power handles voice and alert tones
- 8 Ohm impedance matches standard amplifier outputs
- Pair of speakers included for stereo or dual-zone use
Pair of 1W 8 Ohm Micro Speakers
Two 77 mm diameter drivers rated at 1 watt and 8 ohms each. Full-frequency external-magnet design suits compact enclosures. Supplied as a matched pair for stereo or replacement use. Ready for hobbyist builds and small audio projects.
Ideal for mini boxes doorbells and media players
Fits projects needing clear melodious output from a 23 mm shallow frame. Not suited for high-power mains systems or bass-heavy cabinets. Builders needing greater SPL or deeper low-end should consider larger drivers. No crossover or enclosure hardware is included.
77 mm diameter 8 ohm 1 watt rating
The 77 mm cone and 36 mm magnet set the power handling and low-frequency limit. Impedance of 8 ohms matches common amplifier outputs directly. Verify mounting depth of 23 mm and panel cut-out before ordering. Pair count is fixed at two units.
How it compares
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 98% of the 1,998 comparable items (median $27.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
Will the 1 W rating limit output during extended playback?
The 1 W rated power is the maximum continuous level the 77 mm driver can handle without thermal stress.
Does the 36 mm magnet generate noticeable heat or audible hum when run all day?
The 36 mm external magnet and 8 Ω coil stay cool and silent at normal listening volumes; no fan or heatsink is required.
What amplifier or wiring must I already have to connect these two speakers?
You need an amplifier with an 8 Ω speaker output and two pairs of speaker wire; the speakers have bare terminals for direct connection.
More in HDMI & AV Selector Switches
Similar items
Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
Redpepper HDMI Switch 3×1 4K@30Hz 1080p 1.4b 3.4G
- Push Buttons
- 1080P Video Cable S…





