Unique-Bargains 24" 422N/95lbs Gas Strut Compressor Red
A 24-inch gas strut rated at 95 lbs force holds lids, hatches or RV doors open and adjusts soft-close speed
- Holds up to 95 lbs per strut for reliable lift support
- 24 inch extended length fits hoods, hatches and camper windows
- Adjustable soft-close speed lets you set the perfect closing pace
- Simple hand-tool installation gets you running in minutes with no special tools
- Operates smoothly from -25 °C to 70 °C for year-round dependability
24 inch 95 lb gas strut
This 24 inch gas strut delivers 95 lbs of force per unit to hold open hatches, lids or windows on cars, RVs, campers or cabinets. The red finish and metal construction suit automotive and marine environments. It is sold as a single strut for replacement or custom projects.
Adjustable soft-close speed
The built-in speed adjustment lets you set how slowly the lid or hatch closes after installation. This prevents slamming and gives controlled motion for heavier panels. The strut operates reliably from -25 to 70 degrees Celsius.
Check mounting holes and clearances
Verify that your application uses an 8 mm mounting hole and can accommodate the 18 mm housing diameter. Measure the centre-to-centre distance when fully open (60 cm) and fully compressed (33.7 cm) to confirm fit. Do not compress the strut by hand before mounting.
How it compares
Measured against everything we stock in Gas Struts & Spring Compressors, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 68% of the 50 comparable items (median $19.49).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
Will the 8 mm installation holes need re-drilling if the original brackets use a different bolt pattern?
The strut uses 8 mm mounting holes and a 25 cm rod; verify your bracket spacing matches the 60 cm extended and 33.7 cm compressed centres before fitting.
At what point does the 422 N force stop holding the lid open during a long, hot day?
Rated operation ends at 70 °C; above that temperature the internal pressure may drop below the 95 lb rating and the lid can sag.
How hot does the 18 mm cylinder get after holding a 43 kg load for several hours?
The cylinder runs at ambient temperature; the gas spring generates no heat of its own, so it stays within the -25 °C to 70 °C working range.
More in Gas Struts & Spring Compressors





