We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six rectangular 50W 10 ohm load resistors with wires and quick clips

Unique-Bargains

Unique-Bargains 6pcs 50W 10 ohm Load Resistor passive component

SKU CH-6RYT-WC03T

Set of six 50 W 10 Ω load resistors with quick-connect clips that stop LED turn-signal or licence-plate bulbs from hyper-flashing or triggering dashboard warnings

  • Key featuresLoad resistors 10 ohm;Led load resistors for led turn signal
  • Eliminates LED hyper-flash and dashboard warnings with 10 ohm resistance
  • 50 W power rating handles turn-signal loads without overheating
  • Quick-splice clips install in minutes with no wire cutting required
  • Six resistors plus twelve clips cover front, rear and licence-plate lights
  • Compact 49 mm body mounts on metal surfaces for safe heat dissipation

What these resistors do

This pack contains six 50W 10 ohm load resistors designed to stop LED turn-signal or licence-plate bulbs from hyper-flashing or triggering dashboard warnings. Each bulb needs one resistor wired in parallel. The kit includes twelve quick-connect clips so no wire cutting is required.

Heat and mounting

The resistors become very hot during operation and must be secured to a metal surface; plastic, rubber or painted areas will melt. The aluminium body measures 49 by 16 by 15 millimetres and has a 3.5 millimetre mounting hole spaced 40 by 21 millimetres for firm attachment.

Installation hardware

Twelve splice clips are bundled, letting you tap into the existing wiring without stripping or soldering. Wire leads are 150 millimetres long, giving enough reach for typical lamp housings while keeping the hot body away from heat-sensitive parts.

How it compares

Measured against everything we stock in Passive Components & Solder Supplies, at today’s prices. Recalculated every night.

Price $11.99
Pricier than about 57% of the 265 comparable items (median $9.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

How do I install these 10 ohm 50W load resistors using the supplied quick wire clips?

Connect one resistor in parallel with each LED turn signal or licence plate bulb using the 12 quick wire clips; no wire cutting is required. Mount each resistor on a metal surface through its 3.5 mm holes spaced 40 mm by 21 mm to dissipate heat.

What maintenance or replacement will these aluminium-housed 50W load resistors need over time?

The resistors are passive components with no moving parts; they require no scheduled maintenance. Replace a unit only if it becomes open-circuit or its resistance drifts outside the 10 ohm ± 5 % tolerance.

What thermal limit appears first when these 50W 10 ohm resistors run continuously?

The resistor body reaches very high temperatures during sustained operation; the primary limit is the need to mount it on metal so the 49 mm × 16 mm × 15 mm aluminium case can transfer heat away and avoid melting nearby plastic or paint.

More in Passive Components & Solder Supplies

Similar items