Unique-Bargains Copper Refrigeration Tubing 9/64" OD 7/64" ID 6.5 Ft
Soft copper tubing for refrigerant lines, 9/64" OD × 7/64" ID, 6.5 ft coil
- Product typeElectrical Boxes
- 9/64" OD and 7/64" ID fit compact refrigeration lines
- 5 ft coil provides ample length for routing
- Fine ductility allows easy bending without kinking
- Corrosion resistant copper suits refrigerant and oil circuits
- Low melting point enables straightforward welding and brazing
Refrigeration Tubing Dimensions
This soft copper tubing measures 9/64" outside diameter and 7/64" inside diameter across a 6.5 Ft coil. It suits HVAC technicians and DIYers repairing refrigerator, freezer or air-conditioner circuits. The material also serves as an automobile oil line where small-bore copper is specified.
Upgrade From Worn Lines
Replace cracked, kinked or corroded original tubing when a leak appears or during a full system recharge. The jump is worth it when the existing line cannot hold pressure or when contamination requires a clean copper path. It does not suit installations that demand larger bore sizes or pre-flared ends.
Simple Coil Installation
The 6.5 Ft length unrolls for cutting and bending by hand or with a standard tubing bender. Low melting point and high strength allow straightforward brazing or flaring. Take care to deburr cuts cleanly and avoid sharp kinks that restrict flow; improper flares are the most common cause of leaks.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 85% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
| Product type | Electrical Boxes |
Questions about this item
What outer diameter and inner diameter must my fittings match for this 9/64 in OD copper tubing?
The tubing has a 9/64 in outer diameter and a 7/64 in inner diameter, so select flare or compression fittings sized for those dimensions.
How do I flare the 9/64 in OD soft copper coil without cracking it?
Cut square with a tubing cutter, deburr inside and out, slide the flare nut on first, then use a flaring tool matched to the 9/64 in OD; the soft copper work-hardens, so apply steady pressure.
When should I replace the 6.5 ft copper refrigeration line?
Replace if you see green corrosion, kinks that restrict flow, or any crack at a flare joint; the 83 g coil has no service interval, so inspect during system service.
More in Electrical Enclosures & Cabinets
Similar items
Hubbell Incorporated RACO 257H Electrical Box 42 cu in Square 2 Gang Galvanized Steel
- Electrical Boxes &…
Eaton XTD4B2A Toggle Switch DPDT 6 Connections On/Off/On 1 1/2 hp 10A
- Industrial Electric…
Legrand V2010A2 Entrance End Fitting Ivory Steel electrical box
- Cable Management &…





