We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black plastic CR1220 battery holders with gold contacts

Unique-Bargains

Unique-Bargains CR1220 Battery Holder 5pcs Black

SKU CH-5H7H-75H74

Pack of five black plastic holders for CR1220 button cells with gold-tone contacts

  • Holds CR1220 cells securely with SMD-type footprint
  • Compact 15 x 15 x .16 mm body fits tight PCB layouts
  • Gold-tone contacts on black plastic resist corrosion
  • Five holders per pack support multiple builds or spares
  • Lightweight 4 g total adds minimal mass to assemblies

CR1220 Battery Holder Pack

This pack contains five black plastic holders designed for CR1220 lithium button cells. Each holder uses an SMD-type footprint measuring 15 x 15 x 4 mm with gold-tone contacts. The lightweight units weigh roughly 4 g in total and ship without batteries included.

Suits DIY repairs and small electronics

Hobbyists replacing coin cells on motherboards, remotes or medical devices will find the surface-mount format convenient. Builders needing through-hole pins, larger capacities or holders for other cell sizes should look elsewhere.

Simple surface-mount installation

The holder pads are soldered directly to the PCB using standard reflow or hand-soldering techniques. Misalignment during placement is the most common issue, so check pad orientation before heating.

How it compares

Measured against everything we stock in Disposable & Rechargeable Batteries, at today’s prices. Recalculated every night.

Price $3.99
Cheaper than about 95% of the 985 comparable items (median $28.99).

Specifications

Product
Brand nameUnique Bargains

Questions about this item

Does the CR1220 holder need a specific PCB footprint to solder in place?

The holder uses an SMD type design with a 15 x 15 mm body size and 0.16 mm height, so the PCB pads must match that footprint.

Can I mix these holders with older through-hole battery sockets on the same board?

Yes, the SMD holders sit flat on the surface while through-hole parts use drilled holes, so they can share a board without mechanical conflict.

How do I verify the holder grips the cell correctly after soldering?

Insert a CR1220 cell; the gold-tone metal contacts should hold it firmly with no wobble, and the voltage should read at the solder pads.

More in Disposable & Rechargeable Batteries

Similar items