Unique-Bargains PC16-02 1/4" G 16mm pneumatic fitting 4 pcs
Pack of four push-to-connect fittings joining 16 mm tubing to 1/4" G male threads, rated to 1.5 MPa
- Push-to-connect design allows tool-free tube installation
- Male G 1/4" thread fits standard pneumatic ports
- 16 mm tube OD suits 5/8" polyurethane or nylon lines
- Rated to 1.5 MPa for reliable high-pressure sealing
- Pack of four fittings weighs 112 g total
Push-in fitting for 16 mm tube
The Unique-Bargains PC16-02 connects 16 mm polyurethane or nylon tubing to a 1/4 inch G male thread. Four gold-tone and blue fittings arrive in the pack, each weighing about 112 grams. The push-to-connect design suits pneumatic lines that need quick assembly without special tools.
Brass body rated to 9 MPa working pressure
The plastic and brass construction resists corrosion and cracking while sealing at pressures up to 9 MPa, with a guaranteed resistance of 1.5 MPa. The round inner hole and elliptical release ring keep the tube secure even when the line is pressurised for long periods. Direction can still be adjusted after the fitting is mounted.
Insert tube fully for a leak-free seal
Cut the tube flat, then push it straight into the joint until it seats against the internal stop. The 32 mm by 24 mm body fits tight spaces, and the 12.75 mm thread diameter matches standard 1/4 inch G ports. Missing the full insertion depth is the most common cause of leaks.
How it compares
Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 73% of the 2,955 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Unique Bargains |
Questions about this item
How much heat or noise does the PC16-02 generate when pressurised to 9 MPa all day?
The fitting is a passive brass-and-plastic connector with no moving parts, so it produces no noise and negligible heat even at the 9 MPa maximum operating pressure.
What tubing and thread must I already have for these four push-to-connect fittings to work?
You need 16 mm (5/8") OD polyurethane or nylon tube and a 1/4" G female threaded port for the male straight thread on each fitting.
Will the 32 mm x 24 mm gold-tone bodies clear the ports on my older 1/4" G manifold?
Each connector measures 32 mm long by 24 mm wide, so verify that the centre-to-centre spacing on your existing manifold leaves at least 24 mm between adjacent 1/4" G ports.
More in Hose Fittings, Adapters & Clamps
Similar items
QSJ Bracket 001 10 Pack 2.48 in 0.08 in Thick Stainless Steel Triangular Corner Brace
- Silver, 2.48 in
- Silver, 2.48 in
Black Box Corporation FOT120 SC SC Rectangular Fiber Optic Coupling
Alphacool 17075 13/10mm 90° Revolvable Compression Fitting Deep Black
- This connector can…





