We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angle USB 2.0 Type A male plug, 4 pins, 20 pieces

Unique-Bargains

Unique-Bargains USB 2.0 4-Pin 90° DIP Conduit 20pcs

SKU CH-9BMT-K5139

Pack of 20 USB 2.0 Type A male plugs with 90° 4-pin DIP mounting for PCB soldering

  • Product typeHI - Conduit & Fittings
  • 90° right-angle design saves PCB space with 11 mm mount pin distance
  • USB 2.0 Type A male port delivers 4-pin connectivity for data and power
  • Compact 19 × 12 × 4.5 mm footprint fits tight enclosures
  • DIP through-hole pins on 2 mm spacing simplify soldering or board mounting
  • Pack of 20 black-and-silver connectors supports volume assembly

USB 2.0 90-degree 4-pin conduit

This pack contains twenty USB 2.0 Type A male plugs with a 90-degree orientation. Each unit has four pins spaced at 2 mm and a mounting distance of 11 mm. The compact body measures 19 x 12 x 4.5 mm and uses metal contacts in a black and silver housing. The parts arrive new and ready for soldering or direct PCB mounting.

Replaces straight or loose connectors

The right-angle shape fits tight panels where a straight plug would protrude or stress the cable. The 2 mm pin pitch matches standard USB 2.0 footprints, so the swap is direct when the board layout allows the 11 mm mounting holes. The upgrade is worthwhile when enclosure depth is limited or when cable routing must stay flat against the board.

Fits hand-soldered or wave-soldered boards

The through-hole pins suit manual assembly or automated lines without special tooling. The metal shell shields the signal contacts and adds mechanical strength at the panel cut-out. No extra brackets or adhesives are required; the plug seats flush once soldered. Builders needing vertical orientation or a different pin count will need a separate part.

How it compares

Measured against everything we stock in Electrical Conduit & Fittings, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 90% of the 1,290 comparable items (median $28.99).

Specifications

Product
Brand nameUnique Bargains
Product typeHI - Conduit & Fittings

Questions about this item

What pin spacing and row distance does the 4-pin 90° USB 2.0 plug need on the PCB?

The pins sit on a 2 mm pitch with the two rows 11 mm apart, so the board footprint must match those centres.

Which soldering step causes most problems when fitting the right-angle DIP connector?

Aligning the 90° body flush to the board before soldering; if it tilts, the 19 mm length and 4.5 mm height will not seat correctly.

How often should the metal contacts be inspected or the connector replaced in a vibration-prone install?

Check the solder joints and contact tension every 12 months; replace the plug if any pin shows fatigue or the housing cracks.

More in Electrical Conduit & Fittings

Similar items