Universal 1/4 inch TS to RCA Mono Cable 150 Foot disposer
A 150-foot unbalanced audio cable with a 6.35 mm TS plug on one end and an RCA plug on the other, built with 24 AWG annealed copper conductors.
- Product typeStrainers
- 150 foot length reaches distant gear across large stages
- 1/4 inch TS to RCA male connectors link amplifiers to mixers
- Spiral shield construction resists kinks and stays flexible on tour
- 24 AWG annealed copper conductors deliver clear unbalanced signal transfer
- Black PVC jacket protects against moisture and tangles during live use
150 Foot TS to RCA Audio Cable
This 150 foot cable connects a 1/4 inch (6.35mm) TS output to an RCA phono input. It suits touring musicians, live sound engineers and installers who need a long unbalanced mono link between amplifiers, mixers or other professional audio gear. The male to male connectors are ready to plug in without adapters.
Spiral Shield PVC Jacket Build
A black PVC jacket protects 24 AWG annealed copper conductors and a spiral shield that resists kinks and stays flexible on stage or in rack runs. REAN brand connectors provide durable contact surfaces for repeated mating cycles. The lightweight construction reduces strain on panel jacks during permanent installs.
Unbalanced Mono Signal Limits
The TS to RCA topology carries an unbalanced mono signal, so cable runs near lighting dimmers or power cables can pick up hum and interference. Lengths of 25, 50, 100 and 150 feet are available, but longer runs increase capacitance and high frequency roll off. Buyers needing balanced low impedance lines or stereo channels should choose a different cable type.
How it compares
Measured against everything we stock in Garbage Disposals, at today’s prices. Recalculated every night.
- Price $130.99
- Pricier than about 91% of the 25 comparable items (median $15.99).
Specifications
| Product | |
|---|---|
| Product type | Strainers |
Questions about this item
What unbalanced audio standard does the 1/4 inch TS to RCA cable use, and what signal level does it carry in practice?
The cable carries an unbalanced line-level signal between a 6.35 mm TS output and an RCA phono input, suitable for connecting amplifiers to mixers.
What physical clearance and connector size are needed to fit the 150-foot TS-to-RCA cable?
The cable uses a 6.35 mm TS male plug and an RCA male plug; both are standard sizes that fit typical mixer, amplifier and audio-interface jacks.
How is the 150-foot TS-to-RCA cable installed, and which step do users often get wrong?
Plug the TS end into the 1/4 inch output and the RCA end into the phono input; the common mistake is forcing the RCA plug past its detent, which can bend the centre pin.
More in Garbage Disposals
Similar items
Universal Adjustable Stand ACK620K for Wacom Cintiq 16 dtk-1660
- Power Cord





