STARTECH DB92422 RS422 RS485 DB9 to 5 pin terminal block data converter
- DB9 to Terminal
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts RS-232 to RS-485 or RS-422 with 2.5 kV isolation, 600 W surge and ±15 kV ESD protection, auto direction control up to 115.2 Kbps over 5 000 m
The UOTEK UT-502 converts RS-232 signals to RS-485 or RS-422 differential signals. It targets engineers and integrators who need reliable serial communication in industrial environments. The unit provides 2.5KVrms optical isolation and 600W surge protection per wire for harsh conditions.
The converter handles traffic direction automatically without an external RTS flow-control signal. It operates in asynchronous half-duplex mode using only TXD, RXD and GND lines. This simplifies wiring and removes the need for software timing adjustments on the host side.
The adapter supports up to 128 RS-485 or RS-422 devices on a single bus at 9,600bps over 5,000 metres. At the maximum 115.2Kbps rate the reliable distance drops considerably. It requires a 9-30VDC supply drawing 350mA and operates from -40 to 85 degrees Celsius.
Measured against everything we stock in Serial & Protocol Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The converter handles asynchronous half-duplex communication at up to 115.2 Kbps, so actual throughput matches the serial device's configured speed within that limit.
Twisted-pair or shielded cable on the 10-pin terminal block supports runs up to 5,000 m at 9,600 bps, with distance decreasing at higher baud rates.
The unit fits a 117×80×25 mm footprint, mounts via the terminal-block screws, and requires a 9-30 VDC supply capable of 350 mA.
More in Serial & Protocol Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?