We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear polyethylene tubing coil, 1/4 in ID 1/2 in OD, 100 ft length

Usa Sealing

Usa Sealing ZUSA-HT-2922 Polyethylene Tubing 1/4" I.D. 1/2" O.D. 100 ft

SKU CH-FQG5-Y669K

Clear polyethylene tubing for beverage, food and water lines, rated to 340 psi and 140 °F with Shore D 45 hardness

  • Product colorClear
  • Clear tubing lets you see flow inside
  • Polyethylene resists chemicals for safe fluid transfer
  • Rated to 340 psi for high-pressure use
  • Withstands 140 degrees F for hot applications
  • 100 ft coil covers long runs without joints

Clear Polyethylene Tubing

This 100 ft coil of clear polyethylene tubing is designed for beverage, food and water applications. Its 1/4 in inside diameter and 1/2 in outside diameter suit low-pressure fluid transfer in commercial and residential plumbing tasks. The material carries a Shore D 45 hardness rating for reliable handling. It is supplied new and ready for installation.

Capacity and Pressure Limits

The tubing withstands a maximum operating pressure of 340 psi, providing headroom for typical potable water and beverage dispensing systems. At 140 Degrees F the material reaches its maximum operating temperature, so steam or high-temperature process lines are outside its comfortable range. Chemical resistance extends service life in standard water treatment environments. The 100 ft length reduces the number of joints required on long runs.

Temperature and Compatibility Constraints

Operating above 140 Degrees F risks softening and pressure failure, limiting use to cold and warm water circuits. The tubing is not compatible with peristaltic pumps, so alternative pump types must be selected. No jacket is present, leaving the outer surface exposed to abrasion in tight routing. These factors define the practical envelope for safe, long-term installation.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $47.99
Pricier than about 61% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameZORO SELECT
Product colorClear

Questions about this item

Will the 1/4 in inside diameter and 1/2 in outside diameter match the barbed fittings I already use for beverage lines?

The tubing has a 1/4 in inside diameter and 1/2 in outside diameter, so it fits standard barbs and clamps made for those dimensions.

How can I confirm the tubing handles the 140 °F hot-water cycles in my system?

The maximum operating temperature is rated at 140 °F; if the line stays at or below that temperature the material will perform as specified.

Does the 100 ft coil come with any fittings or clamps, or do I need to buy them separately?

Only the clear polyethylene tubing coil is included; barbed fittings, clamps or other connectors must be purchased separately.

More in Drain Stoppers, Strainers & Traps

Similar items