We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold wheel studs M12x1.25 50mm thread length 14.3mm knurl grade 10.9

V-Project Inc

V-Project Inc 50mm Extended Wheel Studs M12x1.25 10pcs Gold

SKU CH-4K2M-SJGCE

Gold-coloured grade 10.9 extended wheel studs, M12×1.25 thread with 50 mm length and 14.3 mm knurl, supplied as a 10-piece set for Nissan, Infiniti and Subaru applications

  • Commercial or home useResidential
  • Product colorGold
  • Grade 10.9 strength handles high wheel loads
  • 50 mm thread length fits spacer and brake upgrades
  • 3 mm knurl seats securely in factory hubs
  • M12 × 1.25 thread matches wide Nissan and Infiniti range
  • Ten studs per pack covers all four corners

Extended Wheel Studs M12x1.25 50mm

These 50mm extended wheel studs feature M12x1.25 threads and a 14.3mm knurl diameter. The set includes ten gold-finished grade 10.9 pin bolts designed for front and rear axle applications. They suit a wide range of Nissan and Infiniti models from 1987 to 2016 plus select Subaru vehicles up to 2016.

Installation notes and common issues

Installation requires pressing the knurled section into the hub flange until fully seated; a press or careful hammering with a drift is typical. The 14.3mm knurl must match the hub bore exactly or the stud will spin under torque. Over-length studs can contact brake components or wheel pockets if the rotor hat or wheel centre bore is shallow.

Compatibility checks before ordering

Verify your vehicle appears in the listed application range covering specific Nissan, Infiniti and Subaru models and years. Confirm the hub accepts a 14.3mm knurl diameter and that the M12x1.25 thread pitch matches the original hardware. Ensure the 50mm thread length provides sufficient engagement with your lug nuts without bottoming out or protruding excessively.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $15.99
Pricier than about 70% of the 760 comparable items (median $7.99).

Specifications

Product
Brand namev-project
Product colorGold
More details
Commercial or home useResidential

Questions about this item

How do I verify the 10.9 grade M12x1.25 studs are seated correctly after installation?

Torque each stud to the vehicle manufacturer's specification for M12x1.25 hardware, then confirm the 14.3 mm knurl is fully drawn into the hub with no visible gap and the 50 mm thread length engages the lug nut fully.

The box lists 10 pieces; do I need to purchase lug nuts or any other hardware separately?

The pack contains only the 10 extended wheel studs; matching M12x1.25 lug nuts are not included and must be bought separately if your current nuts do not suit the 50 mm thread length.

My car is a 2005 Nissan 350Z Roadster — are these the correct 50 mm M12x1.25 studs or do I need a different length?

The 50 mm M12x1.25 studs with 14.3 mm knurl are specified for the 2004-2009 350Z Roadster Z33, so this kit matches your vehicle.

More in Valve Stem Caps & Wheel Locks

Similar items