V-Project Inc 50mm Extended Wheel Studs M12x1.25 Gold 10pcs Accessories - Wheels

Extended wheel studs for Nissan and Infiniti

These 50 mm M12x1.25 studs replace factory bolts on a wide range of Nissan and Infiniti models from the 1990s through 2016. The 10.9-grade steel and gold finish suit enthusiasts fitting spacers or aftermarket wheels that need extra thread engagement. A 14.3 mm knurl matches the hub bore on listed applications. The kit includes ten pieces for a full four-corner swap.

Thread length and fitment headroom

Each stud provides 50 mm of threaded length, giving roughly 15 mm more engagement than many OEM bolts on the same hubs. That extra length handles 10 mm to 15 mm spacers without bottoming out the lug nuts. Beyond 15 mm spacers the exposed thread may become marginal, so thicker adapters need longer studs. The 14.3 mm knurl seats securely in the factory hub without reaming.

Upgrade from factory bolts on listed platforms

Owners moving from stock bolts to these studs gain the clamping consistency of a stud-and-nut arrangement, which is preferred for track days and frequent wheel changes. The jump is worth it when spacers are already planned or when OEM bolts have stretched after repeated torque cycles. Vehicles not listed — including later-model Nissans, Infinitis or Subarus — are not confirmed for this knurl diameter or thread pitch.