We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold extended wheel studs with knurled heads and threaded shafts

V-Project Inc

V-Project Inc 50mm Extended Wheel Studs M12x1.5 Gold 10pcs accessories - wheel

SKU CH-6HTH-VWWEH

Set of ten grade 10.9 M12x1.5 extended wheel studs, 50 mm thread length with 14.22 mm knurl, for front and rear fitment on listed Toyota and Scion models

  • Commercial or home useResidential
  • Product colorGold
  • 50 mm thread length fits thick spacers or aftermarket wheels
  • Grade 10.9 steel handles high clamping loads on track or street
  • M12 × 1.5 thread matches factory hubs on many Toyota and Scion models
  • 22 mm knurl seats securely in OEM hub bores without modification
  • Gold finish resists corrosion and simplifies visual inspection

Vehicle Fitment

These 50 mm extended wheel studs suit Toyota Yaris L4 1.5 models from 2006 to 2015 and a wide range of other Toyota and Scion vehicles listed in the application data. They replace factory studs on both front and rear hubs for residential use.

Thermal Noise Power

The grade 10.9 steel construction handles normal clamping loads without stretching under typical driving conditions. Gold finish resists corrosion that could affect torque retention over time. No moving parts generate noise or draw power.

Build Connectors Mounting

Each stud features a 14.22 mm knurl diameter for a secure press fit into the hub. M12 x 1.5 thread pitch matches original hardware specifications. Pack includes 10 pieces to cover multiple wheel positions in a single service.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $15.99
Pricier than about 70% of the 760 comparable items (median $7.99).

Specifications

Product
Brand namev-project
Product colorGold
More details
Commercial or home useResidential

Questions about this item

How do I install the 14.22 mm knurl studs and which step is often missed?

Press each stud through the hub until the knurl seats fully, then secure with a lug nut and flat washer; the step most often missed is verifying the knurl is completely seated before torquing.

When will the Grade 10.9 M12x1.5 studs need replacement?

Replace any stud that shows thread damage, corrosion, or has been over-torqued; inspect whenever wheels are removed and swap out stretched or stripped studs immediately.

What limit appears first on these 50 mm studs under sustained hard driving?

The 10.9-grade tensile strength is the limiting factor; repeated extreme clamping loads can stretch the studs, so monitor for elongation and replace if length increases.

More in Valve Stem Caps & Wheel Locks

Similar items