We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten gold threaded wheel studs with knurled bases and tapered seats

V-Project Inc

V-Project Inc Extended Wheel Stud M12x1.25x50mm 14.3mm Knurl 10pcs Gold accessories - wheel

SKU CH-PWFF-28FZT

M12×1.25 extended wheel studs, 50 mm long with 14.3 mm knurl, grade 10.9, gold finish, pack of 10

  • Commercial or home useResidential
  • Product colorGold
  • Fits Nissan Juke V4 1.6 2011-2015 and many other Nissan/Infiniti/Subaru models
  • M12x1.25 thread with 50mm length for extended wheel spacer clearance
  • Grade 10.9 steel studs handle high clamping loads
  • 3mm knurl diameter matches factory hub bores
  • Gold finish resists corrosion and eases installation identification

M12x1.25 Extended Wheel Studs 50mm

These gold-coloured Grade 10.9 studs replace factory wheel bolts with a 50 mm thread length and 14.3 mm knurl. The pack contains ten pieces for residential automotive use on front and rear hubs.

Upgrade from standard bolts when using wheel spacers

The longer thread engages the hub fully after a spacer is fitted, restoring safe clamping force. The jump is worth it whenever the original studs are too short to reach the lug nut seating surface.

Direct press-in installation suits most home garages

A press or careful hammer-and-socket method seats the knurl; the old studs must be driven out first. Common issues include damaged threads from cross-threading lug nuts and knurl deformation if the hub hole is oversized.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $15.99
Pricier than about 70% of the 760 comparable items (median $7.99).

Specifications

Product
Brand namev-project
Product colorGold
More details
Commercial or home useResidential

Questions about this item

What is the 14.3 mm knurl diameter for on these M12x1.25 studs?

The 14.3 mm knurl is the press-fit diameter that locks the stud into the hub flange. It must match the existing hub bore to prevent rotation under load.

Which step is most often missed when pressing in the 10.9-grade M12x1.25 studs?

The hub must be cleaned and the knurl aligned square before pressing; angling the stud damages the knurl and reduces clamping force.

When should the 10-piece set be inspected or replaced after installation?

Inspect torque after the first few kilometres and at every wheel removal; replace any stud showing thread damage, corrosion or stretch beyond the 50 mm thread length.

More in Valve Stem Caps & Wheel Locks

Similar items