We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with M12×1.5 threaded components for pin studs

V-Project Inc

V-Project Inc Wheel Stud Installer Kit M12×1.5 Chrome 20mm

SKU CH-GDE4-ZTTW4

Installs M12×1.5 wheel studs on a wide range of Acura, Chevrolet, Chrysler, Dodge, Eagle, Ford, Honda, Hyundai, Kia and other models from 1986 to 2018

  • Commercial or home useResidential
  • Product colorChrome
  • Fits M12×1.5 threads on many Acura, Honda and Hyundai models
  • Chrome finish resists corrosion during repeated installations
  • 20 mm stud length suits pin-type wheel studs
  • Includes 300 mm handle for leverage when pressing studs
  • Compact 24.9 × 43.15 mm body fits tight hub spaces

Vehicle Fitment

This wheel-stud installer kit is built for M12×1.5 pin studs on a wide range of passenger cars from 1986 through 2018. It covers numerous Honda, Acura, Ford, Hyundai, Chevrolet, Chrysler, Dodge and Eagle models listed in the application data. The chrome-finished components are sized at 20 mm, 24.9 mm and 43.15 mm to match the factory thread specification. DIY owners and independent shops can use it to replace worn or damaged studs without specialised press equipment.

Hand-Tool Operation

The kit relies on manual force applied through the supplied nut and sleeve, so there is no hydraulic pressure or impact wrench involved. Chrome plating resists corrosion during occasional residential use. Because the tool engages the existing lug-thread pattern, it installs the new stud by drawing it into the hub as the nut is tightened. No external power source or compressed air is required for normal installation.

Sustained Installation Effort

Repeated stud changes on multiple wheels demand continuous hand torque, which can fatigue the operator before the tool reaches any thermal limit. The steel construction absorbs the mechanical load without deforming, but the user must supply the turning force for each stud. Vehicles with seized or corroded hubs may need additional penetration time before the kit can complete the press-in cycle. Buyers who need powered pressing for high-volume work should consider a hydraulic alternative.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $7.99
Typical for this category: the median of 760 items is $7.99.

Specifications

Product
Brand namev-project
Product colorChrome
More details
Commercial or home useResidential

Questions about this item

How do I install the M12×1.5 chrome wheel studs using this kit, and which step is often done incorrectly?

Thread the installer nut onto the new M12×1.5 stud by hand, then tighten with a socket until the stud seats fully; the step often missed is checking that the 20 mm knurl engages the hub before applying final torque.

What maintenance or replacement will the chrome wheel studs need after installation?

Inspect the M12×1.5 threads and chrome finish at each tyre rotation; replace any stud that shows corrosion, stripped threads or a loose fit in the 20 mm knurl section.

What limit appears first on the M12×1.5 chrome studs under sustained driving loads?

The 20 mm knurl length determines clamping retention; if the hub face wears or the stud stretches, the joint loses preload before the chrome coating or thread pitch fails.

More in Valve Stem Caps & Wheel Locks

Similar items