We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three cylindrical pieces

V-Project Inc

V-Project Inc Wheel Stud Installer Kit SAAB 9-3 Cabrio 2003-2012 M12x1.5

SKU CH-ENHA-7A7H9

Installs M12×1.5 wheel studs on SAAB 9-3 Cabrio 2003-2012 using chrome pin-stud tool kit

  • Commercial or home useResidential
  • Product colorChrome
  • Designed for SAAB 9-3 Cabrio 2003-2012 fitment
  • M12 x 1.5 thread matches factory wheel studs
  • Three-piece kit covers 20mm, 24.9mm and 43.15mm lengths
  • Chrome finish resists corrosion during repeated use
  • Purpose-built for pin-type stud installation

SAAB 9-3 Cabrio 2003-2012 fit

This wheel stud installer kit is designed specifically for the SAAB 9-3 Cabrio produced between 2003 and 2012. It provides the correct thread profile for M12 x 1.5 pin-type studs found on these vehicles. The tool set enables precise installation without damaging the wheel hub or new stud threads. It suits DIY owners and mechanics performing brake or hub maintenance on this model.

Chrome finish and dimensional specs

The kit components feature a chrome coating for corrosion resistance during use. Three critical dimensions govern the tool engagement: 20 mm, 24.9 mm and 43.15 mm, matching the stud geometry. These measurements ensure the installer seats squarely on the pin studs. The residential-grade classification indicates suitability for occasional home garage use rather than high-volume shop cycles.

M12 x 1.5 thread requirement

The single specification that decides fitment is the M12 x 1.5 thread size combined with the pin-stud type. Vehicles requiring a different thread pitch, diameter or stud design cannot use this kit. Buyers must confirm their SAAB 9-3 Cabrio uses this exact thread specification before purchase. This tool will not work for cars with bolt-type wheel fasteners or metric threads other than M12 x 1.5.

How it compares

Measured against everything we stock in Valve Stem Caps & Wheel Locks, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 60% of the 760 comparable items (median $7.99).

Specifications

Product
Brand namev-project
Product colorChrome
More details
Commercial or home useResidential

Questions about this item

Will the M12x1.5 threads on the installer tool wear out after repeated stud changes?

The kit is made from chrome-finished steel sized at 20 mm by 24.9 mm by 43.15 mm, so normal residential use will not strip the M12x1.5 threads.

What stops me from pressing in longer studs with this 43.15 mm deep tool?

The tool cavity depth is 43.15 mm, so studs exceeding that length cannot be fully seated.

Does the chrome finish get hot enough to burn hands during back-to-back wheel jobs?

The tool absorbs only hand-force torque; it does not generate heat, so the chrome surface stays at ambient temperature.

More in Valve Stem Caps & Wheel Locks

Similar items