Valterra 4307GR Gate Valve 3 in PVC Class 125 30 psi FIPT
PVC gate valve with rising stainless-steel stem handles water at 30 psi and steam at 15 psi through female IPS connections
- Product typeDrain Components
- Main materialHAWA
- 30 psi water rating ensures reliable flow control
- 15 psi steam limit protects system integrity
- 304 stainless stem resists corrosion in wet environments
- TPE seal material provides tight shut-off
- Female IPS threads allow direct pipe connection
3 in PVC Gate Valve
This Valterra 4307GR gate valve controls water flow in plumbing systems. It uses a 3 inch PVC body rated for Class 125 service. Female IPS threads on both ends accept standard pipe connections. The valve is new and intended for water media.
Installers needing 30 psi cold water shut-off
The rising stem and lever handle give visible position indication and manual operation. Solid 304 stainless steel wedge and seat resist corrosion in water service. TPE seals and a welded PVC bonnet complete the assembly. Builders requiring higher pressure ratings or steam service above 15 psi should select a different valve.
30 psi maximum operating pressure
This single limit decides whether the valve suits the installation. The Class 125 PVC body and 15 psi steam ceiling are fixed by the design. Exceeding 30 psi in water service risks body or seal failure. Verify system pressure before specifying this model.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $42.99
- Pricier than about 58% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Valterra |
| Model name | 4307GR |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
What is the maximum operating pressure for the 3 in PVC gate valve?
The maximum operating pressure is 30 psi, with a steam rating of 15 psi.
What connection type and size does the Valterra 4307GR require?
It uses a 3 in female IPS threaded connection on both sides.
How is the bonnet attached and what should be checked during installation?
The bonnet is welded PVC; verify the rising stem and 304 stainless wedge move freely before pressurising.
More in Drain Stoppers, Strainers & Traps
Similar items
CHICAGO FAUCET COMPANY 240.630.00.1 Transformer
- Drain Components
- HAWA
Viega 79355 ProPress adapter 1-1/4" x 1-1/2" trap
- Drain Components
- Bronze
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Legris 3104 56 04 Push-Fit Tee Fitting 1/4 in x 5/32 in Brass
- Drain Components
- HAWA





