We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel one-piece ball valve with threaded ends

Value Brand

Value Brand 1" FNPT Stainless Steel Fire Safe Ball Valve Inline

SKU CH-HVT3-GNC3T

A 1-inch stainless-steel ball valve rated for 2,000 psi water and combustible-gas service

  • Fire-safe operation backed by 316 stainless steel construction
  • Handles combustible gases and water with 2,000 psi pressure rating
  • One-piece body design eliminates leak paths
  • Standard port configuration maintains flow efficiency
  • California Prop 65 compliance disclosed for chemical transparency

Inline Fire-Safe Ball Valve

This 1" FNPT stainless-steel ball valve is rated for fire-safe service with combustible gases and water. It suits industrial piping systems that require a manual two-way shut-off in hazardous environments.

One-Piece 316 Stainless Construction

The one-piece body and 316 stainless ball replace multi-piece valves that can leak at body joints under thermal cycling. The step up is justified when fire-safe certification and a 2,000 psi operating limit are specified for the line.

Standard Port Flow Restriction

A standard-port ball creates a smaller flow area than the pipe bore, so pressure drop is higher than with a full-port design. The valve is not rated for vacuum service and carries no 3-A sanitary compliance, limiting use in clean-process applications.

How it compares

Measured against everything we stock in Faucet Valves & Replacement Parts, at today’s prices. Recalculated every night.

Price $52.99
Typical for this category: the median of 1,132 items is $54.99.

Specifications

Product
Brand nameZORO SELECT
Product typeOther

Questions about this item

What pipe thread size does the 1 in FNPT valve connect to?

It mates with a 1 in female NPT thread on each end for a straight inline connection.

How is the one-piece 316 stainless body installed without stressing the joints?

Thread both ends into the pipework first, then tighten each side evenly so the single-piece body does not twist.

When should the PTFE seats in this 2 000 psi ball valve be inspected or replaced?

Check for leakage or stiff handle movement annually; replace seats if the valve no longer seals at full pressure.

More in Faucet Valves & Replacement Parts

Similar items