Value Brand 24x24 Yellow Steel Pegboard 2 Pack
Two yellow steel pegboard panels provide 4 sq ft of tool storage with a 300 lb load capacity
- Two panels give 4 sq ft of tool storage
- Square 3/8 in holes on 1 1/2 in centres accept standard pegboard hooks
- 300 lb load capacity per panel holds heavy equipment
- Epoxy powder-coated steel resists corrosion in workshop conditions
- Yellow finish improves visibility of stored tools
Two-panel steel pegboard set
This Value Brand pegboard kit includes two yellow steel panels, each measuring 24 inches by 24 inches with a half-inch depth. The square holes are spaced 1 1/2 inches apart and sized at 3/8 inch to accept standard hooks. Together they provide four square feet of tool storage space.
300-pound load capacity per panel
Each panel supports up to 300 pounds of distributed weight, making the set suitable for heavier hand tools and equipment. The epoxy powder-coated finish resists corrosion in garage or workshop environments. Upgrading from a single panel or lighter board is worthwhile when you need more hanging area or greater load-bearing strength.
Fixed square-hole pattern and spacing
The 1 1/2-inch hole spacing and 3/8-inch diameter limit hook compatibility to pegs designed for that specific grid. Panels cannot be cut or reshaped without specialised tools because of the steel construction. Buyers who need a different hole pattern, adjustable spacing, or a lighter material will not be served by this fixed-configuration set.
How it compares
Measured against everything we stock in Storage Sheds & Accessories, at today’s prices. Recalculated every night.
- Price $63.99
- Pricier than about 87% of the 882 comparable items (median $13.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
Questions about this item
What wall spacing do the 1 1/2 in square holes require for mounting brackets?
The panels have square holes spaced 1 1/2 in apart, so mounting brackets must align with that grid; use furring strips or a frame set to the same centres to hit every hole.
Which step is most often missed when hanging the 1/2 in deep steel panels?
Installers frequently forget to leave a 1/2 in stand-off behind the panel; without that gap the hook flanges cannot seat into the 3/8 in square holes.
When should the epoxy powder-coated finish be touched up to keep the 300 lb load rating?
Inspect the yellow coating annually; if bare steel shows, clean the spot and apply a matching epoxy touch-up paint to prevent corrosion that could weaken the panel.
More in Storage Sheds & Accessories
Similar items
Kennedy Manufacturing
Kennedy Manufacturing 50004BL Toolboard Wall Storage Kit Square
$374.99
0.00453292BTC
In stock
