Value Brand 2ERP4 Warning Light Strobe Tube Red 120VAC
A red strobe warning light flashes 72 times per minute at 150,000 candela for 120V AC power systems
- Product colorRed
- Red strobe flashes 72 times per minute for high visibility
- 150,000 candela output cuts through fog and bright daylight
- NEMA 4X rating protects against dust, water and corrosion
- Operates from -31 °F to 150 °F for year-round outdoor use
- Draws only 0.08 A at 120 V AC for low energy cost
Facility Warning Light
The Value Brand 2ERP4 is a red strobe warning light designed for facility and traffic safety applications. It operates on a 120V AC power source drawing 0.08A AC current. The unit mounts via a 1/2 inch NPT fitting and carries a NEMA 4X rating for wet or corrosive environments. It suits maintenance crews and site managers needing visible hazard alerts.
Sustained Flash Output
The strobe tube flashes at a steady rate of 72 flashes per minute with a light output of 150,000 candela. Rated lamp life reaches 8,000 hours of continuous operation. The polycarbonate dome lens and fiber nylon housing maintain optical clarity through extended duty cycles. Performance remains consistent across the full operating temperature range.
Thermal And Electrical Profile
Operating temperature spans -31 degrees to 150 degrees F without derating. The low current draw of 0.08A AC at 120V AC keeps power dissipation minimal during normal use. NEMA 4X enclosure protects internal components from moisture and dust ingress. No active cooling is required for this solid-state warning device.
How it compares
Measured against everything we stock in Traffic Cones, Signs & Safety Gear, at today’s prices. Recalculated every night.
- Price $43.99
- Cheaper than about 59% of the 1,503 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Red |
Questions about this item
How much heat and power does the 120 VAC strobe tube produce when running continuously?
It draws 0.08 A AC at 120 V AC and is rated for ambient temperatures from -31 °F to 150 °F.
What mounting hardware must I already have to install the 1/2 in NPT base?
You need a 1/2 in NPT threaded fitting or conduit hub on the mounting surface.
Will the 72 flashes-per-minute red strobe work with older 120 V AC warning circuits?
Yes, it operates on standard 120 V AC wiring and draws only 0.08 A, so existing circuits can power it.
More in Traffic Cones, Signs & Safety Gear
Similar items
Yescom USA, Inc. 12" Convex Safety Traffic Mirror 2 Pack traffic safety equipment
- Down Lighting
Vaxcel C0174 Turin 14.5in Semi-Flush Mount Bronze traffic safety equipment
Safety Technology International UB-2 Universal Button Momentary 2 In traffic safety equipment
- Gray
Cortina Companies Type 1 Folding Barricade 40 in Orange/White
- Orange/White





