Value Brand Bronze Brazing Alloy Rod 5/32 in 36 in 56% Copper 71000 psi AWS A5.8

Product Identity

This bronze brazing alloy rod is designed for joining copper, steel, brass and similar metals in repair and fabrication work. It suits professional welders, HVAC technicians and maintenance crews who need a strong, ductile joint with good electrical conductivity.

Critical Specification

The rod contains 56 percent copper and delivers a tensile strength of 71,000 psi, meeting AWS A5.8 classification for reliable brazing performance. The melting range falls between 1670 and 1750 degrees Fahrenheit, which determines whether the alloy flows properly for a given base metal and torch setup. Buyers who require a different copper ratio, a lower melting point or a higher strength rating should select another alloy.

Installation Notes

Each rod measures 5/32 inch in diameter and 36 inches long, allowing manual feeding with a standard brazing torch. Clean the joint area thoroughly and apply flux to prevent oxidation; insufficient cleaning is the most common cause of weak or porous joints. Overheating past the narrow melting window can burn off zinc and reduce strength, so maintain even heat and watch for the alloy to flow smoothly into the capillary gap.