Value Brand WESTWARD 41R236 Brazing Alloy 1/8 in 36 in 10 lb

Brazing Alloy for Steel Cast Iron Copper

This WESTWARD RBCuZn-C X brazing alloy joins steel cast iron and copper. The rod diameter is 1/8 in and each rod is 36 in long. It comes in a 10 lb container box. The brazing temperature range is 1670 to 1750 F with a tensile strength of 65 000 psi.

Upgrade from Lower Strength Filler Metals

Switch to this alloy when a joint requires 65 000 psi tensile strength and a melting range of 1670 to 1750 F. The jump is worth it for structural repairs on steel cast iron or copper where lower strength fillers would not hold. It is not for jobs that need a different melting range or a higher tensile strength than 65 000 psi.

Build Fit with Torch and Flux

The 1/8 in diameter rods feed well into standard brazing torches. You will need a suitable flux for the base metals being joined. The 36 in length reduces rod changes on long seams. The 10 lb box stores flat on a shelf. This alloy does not replace welding wire or solder for electrical work.