VEVOR 10L Transmission Fluid Pump 14 Adapters 43PSI engine tool
A pneumatic 10 litre fluid extractor and dispenser with 14 ATF adapters, dual-control valves and a 43 PSI safety release for clean transmission servicing
- Overall width9.84
- 10-litre capacity handles big fluid changes
- 14 adapters cover BMW, VW, Audi and more
- Dual two-way valves switch between extract and dispense
- Built-in gauge and 43 PSI relief valve prevent over-pressure
- Corrosion-resistant copper-plastic body cleans easily
Large-capacity fluid transfer
The VEVOR 10L transmission fluid pump moves up to 10 litres of ATF or oil in a single fill. A two-way valve system switches between extraction and dispensing without disconnecting hoses. The kit includes 14 adapters covering common European and Asian gearbox filler ports. A built-in gauge and 43PSI relief valve protect the circuit from over-pressure.
Professional workshops and advanced DIY
Technicians who service multiple marques will benefit from the broad adapter selection and 10-litre reservoir. Shops that only handle occasional top-ups on a single vehicle may find the capacity and adapter count excessive. The pneumatic operation also requires a compressed-air source, so garages without an airline should consider a manual alternative.
43PSI pressure relief valve
The preset relief valve opens at 43PSI to prevent damage to seals and the pump body during high-pressure dispensing. This fixed limit determines the maximum safe working pressure for every supported transmission. If a specific gearbox demands a higher or lower relief setting, this unit cannot be adjusted to match.
How it compares
Measured against everything we stock in Engine Service & Diagnostic Tools, at today’s prices. Recalculated every night.
- Price $50.99
- Pricier than about 81% of the 1,113 comparable items (median $19.99).
Specifications
No published specifications for this item yet.
Questions about this item
What pressure does the 43 PSI relief valve cap at during fluid dispensing?
The preset relief valve opens at 43 PSI to prevent over-pressurisation while extracting or dispensing transmission fluid.
Will the pump body fit on a shelf that is 6 inches deep?
The pump measures 5.9 inches in depth, so it requires at least that much clearance to sit flat.
How do I switch the two-way valves to change from extracting to dispensing fluid?
Turn the blue screw knob and move the flow direction valve to the opposite position; forgetting to switch both valves is the common error.
More in Engine Service & Diagnostic Tools
Similar items
AFS QIORE PX-801 Engine Tool 7.67 x 4.17 x 1.37 in
- Black
- Corded Electric, Wi…





