VEVOR
VEVOR 6600 lbs Chain Binder 5/16-3/8 G70 Hooks 24-31 in Adjustable 14 in Handle 2 Pack
$52.99
0.0006412BTC
In stock
VEVOR 3/4" D-Ring Shackle 2 Pack Red 4.75T WLL 28.5T Break Strength
Two alloy-steel D-ring shackles rated 4.75 t WLL and 28.5 t break strength with 7/8 in screw pins for off-road recovery
- Overall width5.91
- 75 tonne working load limit for heavy recovery
- 5 tonne break strength from #45 steel body
- 7/8″ 40Cr screw pin with isolators and washers
- Two shackles weighing 5.51 lbs total in the pack
- 51 mm inner diameter accepts thick straps and chains
Vehicle recovery shackle kit
This two-pack supplies alloy-steel D-ring shackles rated for a 4.75-tonne working load limit and a 28.5-tonne breaking strength. Each shackle uses a 7/8-inch screw pin with included isolators and washers for secure attachment during off-road recovery.
Suits off-road recovery, not permanent rigging
The shackles are built for Jeep and truck recovery where a 19-millimetre wire diameter and 51-millimetre inner diameter match common recovery points. They are not intended for overhead lifting, permanent structural rigging or applications that require a larger pin or higher working load limit.
4.75-tonne working load limit decides fit
The 9,500-pound work load limit is the single figure that determines whether the shackle matches your recovery strap or winch line rating. Verify that your gear’s rated capacity does not exceed this limit before use.
How it compares
Measured against everything we stock in Winches & Towing Accessories, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 75% of the 27 comparable items (median $35.99).
Specifications
No published specifications for this item yet.
Questions about this item
What is the difference between the 4.75T working load limit and the 28.5T break strength?
The 4.75T working load limit is the maximum safe load for regular recovery use. The 28.5T break strength is the force at which the #45 steel D-ring or 40Cr steel pin will permanently deform or fail.
How do the 19 mm wire diameter and 22 mm pin diameter affect real-world recovery?
The 19 mm wire diameter and 22 mm pin diameter provide the cross-sectional area needed to reach the 62832 lbs break strength. They fit standard 3/4 inch recovery points and 7/8 inch pin holes on Jeep and truck bumpers.
What does the 7/8 inch screw pin with isolators and washers cap in practice?
The 7/8 inch (22 mm) 40Cr steel screw pin caps the assembly at the 4.75T working load limit. The included isolators and washers reduce metal-on-metal wear and prevent the pin from backing out under vibration.
More in Winches & Towing Accessories
