We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black D-ring shackles with red screw pins and washers

VEVOR

VEVOR 3/4" D-Ring Shackle 2 Pack 62832 lbs Black

SKU CH-SE8X-7JM4W

Two alloy-steel D-ring shackles rated for a 9500 lb working load and 62832 lb breaking strength, supplied with 7/8" screw pins, isolators and washers

  • Overall width5.91
  • Two-pack supplies a spare for every recovery job
  • 62 832 lbs breaking strength handles extreme loads
  • 9 500 lbs work-load limit keeps daily pulls safe
  • Forged #45 steel body resists deformation under stress
  • 7/8 in screw pin with isolators reduces vibration noise

VEVOR 3/4" D-Ring Shackle Pair

This pair of alloy steel D-ring shackles is built for vehicle recovery and heavy towing. Each shackle carries a 9500 lbs work load limit and a 62832 lbs breaking strength. The set includes two shackles with 7/8" screw pins, isolators and washers.

Suits off-road recovery and trailer towing

Buyers needing a higher work load limit or a different pin diameter should look elsewhere. The 0.75 in wire diameter and 2.05 in inner diameter fix the fit, so rigs requiring other dimensions will not match this hardware.

7/8" screw pin with 40Cr steel pin

The pin diameter is 22 mm and the pin material is 40Cr steel, while the D-ring uses #45 steel. This single specification decides whether the shackle matches your recovery point and strap loop.

How it compares

Measured against everything we stock in Winches & Towing Accessories, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 69% of the 27 comparable items (median $35.99).

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2.05 in inner diameter and 19 mm wire diameter let these shackles fit the existing recovery points on my older Jeep?

The 2.05 in inner diameter and 19 mm wire diameter match standard 3/4 in D-ring openings, so they will slide onto most factory recovery points that accept a 3/4 in shackle pin.

How do I verify the 28.5 ton break strength is sound after I install the 7/8 in screw pins?

Torque each 7/8 in pin until the red 40Cr steel pin seats flush against the black #45 steel body and the supplied washers sit flat; a visual check that threads are fully engaged confirms proper assembly.

Do the two shackles come with the isolators and washers shown in the title, or must I buy them separately?

The package includes two complete shackles with 7/8 in screw pins, isolators and washers already fitted; no extra hardware is required.

More in Winches & Towing Accessories

Similar items