We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six rebar cutter blades, right-angle and chamfer, with hex screws and spring washers

VEVOR

VEVOR RC-20 Rebar Cutter Blade Set 20/22mm HRC58-60 6 PCS

SKU CH-JXA9-MX98B MPN RC-20

Six-piece Cr12MoV blade set cuts 20 mm and 22 mm rebar with HRC58-60 hardness and includes mounting hardware

  • Product typeOther Appliances
  • Overall width3.94
  • Cuts 20 mm and 22 mm rebar with 32 x 24 x 11 mm blades
  • HRC 58-60 Cr12MoV steel keeps edges sharp through repeated cuts
  • Six blades plus 12 screws and 12 washers cover full replacement
  • Right-angle and chamfer profiles handle round, carbon and deformed steel
  • Allen-key screw change lets you swap jaws in minutes

Rebar Cutter Blade Set Specifications

This six-piece set supplies replacement jaw blades for the VEVOR RC-20 cutter. Three right-angle blades and three chamfer blades are made from Cr12MoV steel hardened to HRC58-60. The kit includes twelve Allen screws in 5×18 mm and 5×20 mm lengths plus twelve M5 spring washers for installation.

Suitable Cutting Tasks

The blades handle round, carbon, deformed and square steel reinforcement up to 20 mm or 22 mm in diameter. Builders who need to cut thicker rebar or different profiles should look for a larger-capacity cutter. The set is designed only for the compatible hydraulic cutting tool.

Critical Compatibility Detail

Mounting holes are spaced 16 mm apart and accept the supplied 5 mm Allen screws. Verify that the host cutter uses this exact hole pattern and screw length before ordering, as the blades will not fit machines with different mounting dimensions.

How it compares

Measured against everything we stock in Specialty Kitchen Gadgets, at today’s prices. Recalculated every night.

Price $30.99
Cheaper than about 88% of the 3,885 comparable items (median $66.99).

Specifications

Product
Product typeOther Appliances

Questions about this item

What are the blade dimensions and screw-hole spacing for the RC-20 cutter?

Each blade measures 32 by 24 by 11 mm and the mounting holes are 16 mm apart.

Which Allen-key sizes are needed to swap the blades on the RC-20?

Use 5 mm Allen wrenches with 18 mm and 20 mm shank lengths to remove and install the screws.

When should the Cr12MoV blades be replaced?

Replace them when the cutting edges dull or deform so they no longer slice 20 mm or 22 mm rebar cleanly.

More in Specialty Kitchen Gadgets

Similar items