We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass cutting tip size one with threaded base

Victor

Victor 0333-0354 Cutting Tip MTHP Size 1

SKU CH-SY5H-THYSJ

A Victor cutting tip for propylene machine torches, size 1, with a 0.07 in kerf and 24 in/min maximum cutting speed

  • Product typeWelding Parts & Supplies
  • Heavy preheat flame speeds thick steel cuts
  • Propylene fuel runs clean at 12-65 scfh flow
  • 07 in kerf keeps material waste low
  • 24 in/min max speed boosts fabrication output
  • Fits Victor MT 1065 and MT 5 torches

Victor 0333-0354 Cutting Tip MTHP Size 1

This Victor cutting tip is designed for machine torch applications using propylene fuel. It fits the 1-MTHP series and is compatible with MT 1065 and MT 5 torch models. The tip serves fabrication, repair and maintenance tasks.

Propylene tip with 12 to 65 scfh flow rate

The tip handles material from 1 in up to 1 1/2 in thick with a heavy preheat flame. Fuel flow ranges from 12 to 65 scfh while maximum cutting speed reaches 24 in/min. Kerf width measures 0.07 in for precise cuts.

Machine torch mounting for MT 1065 and MT 5

The tip mounts directly to compatible Victor machine torches including part numbers MT 1065N and MT 5. This fixed mounting suits automated or mechanised cutting setups. It is not intended for hand-held torch use.

How it compares

Measured against everything we stock in Welding Equipment & Positioners, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 87% of the 1,978 comparable items (median $50.99).

Specifications

Product
Brand nameVICTOR
Product typeWelding Parts & Supplies

Questions about this item

Will the Victor 0333-0354 tip fit my existing MT 1065 or MT 5 machine torch?

Yes, the tip is designed for the MT 1065 and MT 5 torch series and matches part numbers MT 1065N and MT 5.

How can I confirm the tip is performing correctly once installed?

With propylene flow between 12 and 65 scfh you should see a heavy preheat flame, a kerf around 0.07 in and cutting speeds up to 24 in/min on 1 to 1-1/2 in material.

Does the package include the torch or any adapters, or just the tip?

The box contains the single MTHP Size 1 cutting tip only; the compatible MT 1065 or MT 5 torch and any required adapters are sold separately.

More in Welding Equipment & Positioners

Similar items