We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VideoSecu

VideoSecu ML12B-A10 full-motion TV mount 15-24" 44 lbs VESA 75/100

SKU CH-52QT-76QZH

Full-motion wall mount holds 15 to 24 inch screens up to 44 lbs with VESA 75/100, tilting five degrees, swivelling 180 degrees and extending 15 inches

  • Product nameSwing Arm TV Monitor Wall Mount
  • Mounting typeArticulating/Full Motion
  • AdjustabilityTilt +/-5°, Swivel 180°, Extend 2.4 to 15 in
  • Supported TV size< 30 in
  • TV weight limitLoading capacity: 44 lb
  • VESA compatibility100 × 100/75 × 75 mm (4 inx4 in/3 inx3 in)
  • Full motion articulation with tilt, swivel and 15" extension
  • Post-installation level adjustment keeps the screen perfectly level
  • Supports displays up to 44 lbs on VESA 75/100
  • Durable steel construction with black powder-coated finish
  • Single-stud mounting for quick and easy installation

VideoSecu ML12B-A10 full-motion mount

The VideoSecu ML12B-A10 is an articulating wall bracket built for screens from 15 to 24 inches and some models up to 29 inches. It suits home offices, bedrooms or kitchens where a single display needs frequent repositioning. The steel frame carries up to 44 lbs and fits VESA 75x75 and 100x100 patterns. It mounts to one stud for a fast, secure install.

Tilt, swivel and extension range

The arm tilts five degrees up or down and swivels 180 degrees side to side for smooth angle changes. It extends from 2.4 inches to 15 inches from the wall and rotates 360 degrees for portrait or landscape use. Post-installation level adjustment keeps the screen straight after mounting. Durable steel with a black powder coat handles the load without flex.

Replaces fixed or low-profile brackets

This mount replaces a fixed or low-profile bracket when you need to pull the screen out, swing it sideways or rotate it for different tasks. The jump is worth it if you share a monitor between desks or want to tuck the display flat against the wall when not in use. It does not fit TVs 27 inches or larger made before 2013. Buyers needing support for heavier or wider screens should look elsewhere.

How it compares

Measured against everything we stock in TV Wall Mounts & Install Kits, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 93% of the 1,540 comparable items (median $47.99).

Specifications

Product
Brand nameVideoSecu
Model nameML12B-A10
Product nameSwing Arm TV Monitor Wall Mount
Product colorBlack
Size & build
Mounting typeArticulating/Full Motion
AdjustabilityTilt +/-5°, Swivel 180°, Extend 2.4 to 15 in
TV weight limitLoading capacity: 44 lb
VESA compatibility100 × 100/75 × 75 mm (4 inx4 in/3 inx3 in)
Compatibility
Supported TV size< 30 in

Questions about this item

How do I mount the ML12B-A10 to a single wood stud and keep the TV level after installation?

Attach the wall plate to one stud using the supplied lag bolts, hang the arm, then use the post-installation level adjustment on the bracket to fine-tune the display until it sits perfectly horizontal.

Which parts of this full-motion mount might need tightening or replacement after months of daily swivelling?

The pivot bolts at the tilt, swivel and extension joints can loosen over time; check them periodically and re-torque if movement develops, and replace any bolt that strips or corrodes.

At what point does the 15-inch extension arm start to sag or resist smooth motion under a heavy monitor?

The 44 lb load rating is the limiting factor; as the display weight approaches that figure the arm will deflect more at full 15" extension and the swivel action becomes stiffer.

More in TV Wall Mounts & Install Kits

Similar items