We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black articulating TV wall mount with nested arms extended, matte steel finish, VESA plate visible

VideoSecu

VideoSecu ML541BAE TV Mount 22-42in 66lbs VESA 200x200 180° Swivel 20in Extend

SKU CH-NJ2W-S3KXN

Full-motion bracket holds 22–42 in screens up to 66 lbs, swivels 180°, tilts 15° and extends 20 in from the wall

  • Product nameTilt Swivel TV Wall Mount
  • Mounting typeArticulating/Full Motion
  • AdjustabilityTilt +/-15°, Swivel 180°, Extend 20 in, Low profile 1.9 in
  • Supported TV size< 40 in
  • TV weight limitMax. load 66 lb
  • VESA compatibility200 × 200/200 × 100/100 × 100/75 × 75 mm

TV Size Capacity < 40"

  • Supports screens from 22 to 42 inches with VESA 200x200 compatibility
  • Holds up to 66 lbs using heavy-duty steel construction
  • Extends 20 inches and swivels 180 degrees for flexible viewing
  • Tilts 15 degrees up or down to reduce glare
  • Folds to a 1.9 inch low profile against the wall

Tilt-Swivel Wall Mount 22–42in 66lbs

This VideoSecu ML541BAE articulating bracket holds flat-panel displays from 22 to 42 inches weighing up to 66 lbs. It mounts to wood studs or concrete and supports VESA patterns of 75x75, 100x100, 200x100 and 200x200 mm. The arm extends 20 inches and folds back to a 1.9-inch low profile.

Installers wanting full-motion adjustment

The mount delivers +/-15° tilt, 180° swivel and 20-inch extension for corner seating or glare reduction. It suits living rooms, bedrooms and offices where the TV must pull out and swivel. Displays heavier than 66 lbs or larger than 42 inches exceed the rated capacity and need a different bracket. Screens with VESA hole spacings not listed above cannot be attached.

180° swivel with 20-inch extension

The defining spec is the combination of 180° horizontal swivel and 20-inch arm reach, which lets a 42-inch screen pivot from flush against the wall to fully extended for side-angle viewing. If the installation only requires a fixed or tilting position, a simpler low-profile mount will be thinner and less costly.

How it compares

Measured against everything we stock in TV Wall Mounts & Install Kits, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 84% of the 1,540 comparable items (median $47.99).

Specifications

Product
Brand nameVideoSecu
Model nameML541BAE
Product nameTilt Swivel TV Wall Mount
Product colorBlack
Size & build
Mounting typeArticulating/Full Motion
AdjustabilityTilt +/-15°, Swivel 180°, Extend 20 in, Low profile 1.9 in
TV weight limitMax. load 66 lb
VESA compatibility200 × 200/200 × 100/100 × 100/75 × 75 mm
Compatibility
Supported TV size< 40 in

Other versions of this model

3 more in the same range

Questions about this item

Will the VESA 200x200 or 100x100 plate on this mount fit the 75x75mm pattern on my older 22-inch monitor?

Yes, the mount supports VESA 75x75, 100x100, 200x100 and 200x200mm patterns, so it will match the 75x75 holes on a 22-inch display.

How can I confirm the arm is level after I hang the TV?

Use the post-installation level adjustment on the VESA plate to fine-tune the TV until it sits perfectly horizontal.

Does the box include the lag bolts needed for a concrete wall, or must I buy them separately?

The package supplies hardware for wood stud and concrete installation; no extra fasteners are required for those surfaces.

More in TV Wall Mounts & Install Kits

Similar items