We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount with two articulated arms and quick-release tabs, shown flat against a wall

VideoSecu

VideoSecu MP409B-B1 Tilt TV Wall Mount 26-42in 55lbs VESA 400x400

SKU CH-YHKW-1PPKD

Tilt bracket holds 26 to 42 inch screens up to 55 lbs with VESA patterns up to 400x400 mm and 10 degree forward tilt

  • Product nameTilt TV Wall Mount
  • Mounting typeMounting Bracket
  • AdjustabilityTilt 10° forward, Depth 2 in
  • Supported TV size< 40 in
  • TV weight limit55 lb (24.9 kg)
  • VESA compatibility400 × 400/ 400 × 300/ 400 × 200/ 300 × 300/ 300 × 200/ 200 ×
  • Tilt 10° forward for reduced glare and better viewing angles
  • Quick release tabs on both arms enable fast installation and removal
  • Supports VESA patterns from 100x100mm up to 400x400mm for wide compatibility
  • Holds displays up to 55lbs with heavy-duty steel construction
  • Low-profile 2" depth keeps the screen close to the wall

Tilt Mount for 26-42 Inch Screens

The VideoSecu MP409B-B1 is a fixed-position wall bracket that tilts 10 degrees forward. It supports flat-panel televisions from 26 to 42 inches weighing up to 55 lbs. Compatible VESA patterns range from 100x100 mm up to 400x400 mm. The mount sits 2 inches from the wall for a low-profile appearance.

Fits Wood Studs up to 16 Inches Apart

The bracket anchors directly into standard wood studs spaced up to 16 inches on centre. A built-in bubble level helps achieve a straight installation without extra tools. Quick-release tabs on both arms allow the display to be detached easily for cable access or relocation. End caps conceal the locking hardware for a clean side view.

Heavy-Duty Steel Construction

The all-steel frame provides rigidity while holding the screen close to the wall surface. No moving parts beyond the tilt hinge means silent operation and no power draw. The finish resists scratches during installation and daily use. Note that televisions 42 inches or larger manufactured before 2013 may not fit this bracket.

How it compares

Measured against everything we stock in TV Wall Mounts & Install Kits, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 91% of the 1,540 comparable items (median $47.99).

Specifications

Product
Brand nameVideoSecu
Model nameMP409B-B1
Product nameTilt TV Wall Mount
Product colorBlack
Size & build
Mounting typeMounting Bracket
AdjustabilityTilt 10° forward, Depth 2 in
TV weight limit55 lb (24.9 kg)
VESA compatibility400 × 400/ 400 × 300/ 400 × 200/ 300 × 300/ 300 × 200/ 200 × 200/ 200 × 100/ 100 × 100 mm or any holes patterns within 100-400 mm wide and 100-400 mm high
Compatibility
Supported TV size< 40 in

Questions about this item

How far does the 55lb capacity stretch before the steel bracket or the 16in stud spacing becomes the limiting factor?

The mount is rated for 55lbs and mounts to studs up to 16in apart; exceeding either limit risks failure.

Does the 2in low-profile gap and 10° forward tilt trap heat or amplify fan noise during all-day use?

The 2in stand-off allows airflow behind the screen, and the fixed 10° tilt adds no moving parts or noise.

My TV uses a 400x400 VESA pattern — do I need a separate adapter plate or does the bracket cover that natively?

The bracket includes native 400x400 support plus all smaller patterns down to 100x100mm, so no extra plate is required.

More in TV Wall Mounts & Install Kits

Similar items