VideoSecu MW380B3 Full Motion TV Mount 40-70in 125lbs VESA 700x400mm 16in Extension

Articulating mount for 40–70 inch displays

The VideoSecu MW380B3 is a full-motion wall bracket built for flat-panel TVs between 40 and 70 inches, with some LED models up to 80 inches supported. It suits living rooms, bedrooms or offices where the screen needs to be pulled out, tilted or swivelled for different seating positions. Heavy-duty steel construction and a powder-coated black finish keep the installation looking clean.

125 lb load limit and VESA 700×400 maximum

The single figure that decides fit is the 125 lb weight rating combined with a maximum VESA pattern of 700 mm wide by 400 mm high. Hole spacings from 200×100 mm up to that ceiling are covered, including common 600×400, 684×400 and 400×400 layouts. If the display exceeds 125 lbs or its mounting holes sit outside the 200–700 mm width and 100–400 mm height window, this bracket cannot be used.

16 inch extension folds to 2.9 inches

At full reach the arm extends 16 inches from the wall, giving ample clearance for cable access or angled viewing across a deep room. When pushed back the mount nests to less than 2.9 inches deep, leaving the screen nearly flush against the wall. Tilt adjusts ±15° and a 6° rotation aids post-install levelling. The design fits 16-inch-centre wood studs; displays 65 inches and larger made before 2013 are explicitly excluded.