We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega steel press-fit tee with zinc nickel finish

Viega

Viega 25405 Steel Press-Fit Tee 3/4"×3/4"×FNPT 1/2" bathware

SKU CH-YSA6-8VEG4

Steel press-fit tee joins two 3/4 in lines to a 1/2 in female thread, rated 200 psi at 250 °F

  • Product typeTraffic & Parking Lot
  • Press-fit connections install without soldering or threading tools
  • Three-port tee joins 3/4 in press lines to 1/2 in female pipe thread
  • Steel body with zinc nickel plating resists corrosion in non-potable water systems
  • EPDM O-ring seals rated for 200 psi at 250 °F operating conditions
  • Compact 4 17/32 in overall length fits tight mechanical spaces

Viega Steel Press-Fit Tee

The Viega 25405 is a zinc nickel-plated steel tee designed for non-potable water systems. It connects two 3/4 inch press-fit ends with a 1/2 inch female pipe thread branch. The fitting carries an EPDM O-ring and is rated for 200 psi at 250 degrees F.

Press-Fit Connection Benefits

The press-fit ends eliminate the need for threading or soldering on the main run, reducing installation time and the risk of leaks at those joints. The 1/2 inch FPT branch allows a straightforward transition to threaded components or fixtures without additional adapters.

Capacity and System Limits

This tee handles pressures up to 200 psi and temperatures up to 250 degrees F, covering typical hydronic heating and cooling loops. It is not approved for potable water service, so it cannot be used in drinking water supply lines.

How it compares

Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.

Price $27.99
Cheaper than about 62% of the 1,499 comparable items (median $39.99).

Specifications

Product
Brand nameVIEGA
Product typeTraffic & Parking Lot

Questions about this item

How often should the EPDM O-ring on this 3/4" press tee be inspected or replaced?

The EPDM O-ring is rated for continuous service up to 250°F and 200 psi; inspect it whenever the system is opened or pressure-tested, and replace it if any cracking or permanent deformation is visible.

What pressure limit will this steel tee reach first during sustained operation?

The fitting is rated for a maximum operating pressure of 200 psi, so that is the ceiling you must not exceed under steady-state conditions.

How hot does the zinc-nickel body get when the line runs at the 250°F temperature rating all day?

The steel body will essentially match the fluid temperature, so expect surface temperatures near 250°F during continuous high-temperature operation.

More in Bath Accessories & Soap Dispensers

Similar items